Differential Oil (Rear) - Change
Interval penggantian oli akan berkurang hingga 500 jam jika lebih dari 50% dari jam servis digunakan untuk pengangkutan dan pemuatan.
Show/hide table
| |
| Ilustrasi 1 | g03745697 |
- Lepaskan sumbat saluran pembuangan oli (1) dan kuras oli ke dalam wadah yang sesuai.
- Bersihkan sumbat kuras dan pasang kembali.
- Lepaskan sumbat pengisian/tingkat oli (2).
- Tambahkan oli hingga oil rata dengan lubang berulir untuk sumbat pengisian. Untuk oli, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Viskositas Pelumas" dan Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas (Pengisian Ulang)".
- Bersihkan sumbat pengisian dan pasang kembali sumbat pengisian.
Catatan: Untuk alat berat dengan LBF dan ; LBS sebagai awalan, ikuti prosedur berikut:
Show/hide table
| |
| Ilustrasi 2 | g06212617 |
|
Untuk alat berat dengan LBF dan ; LBS sebagai awalan saja (A) Lubang saluran pembuangan oli (B) Lubang saluran pembuangan oli (C) Lubang pengisian oli/lubang pemeriksa tingkat oli | |
- Lepaskan sumbat saluran pembuangan oli (A) dan (B) dan kuras oli ke dalam wadah yang sesuai.
- Bersihkan sumbat kuras dan pasang kembali.
- Lepaskan sumbat pengisian/tingkat oli (C).
- Tambahkan oli hingga oil rata dengan lubang berulir untuk sumbat pengisian. Untuk oli, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Viskositas Pelumas" dan Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas (Pengisian Ulang)".
- Bersihkan sumbat pengisian dan pasang kembali sumbat pengisian.
Caterpillar Information System:
MH3037 Material Handler Machine Systems Heater Core - Remove and Install
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil (Front) - Change
416F2, 420F2 and 430F2 Backhoe Loaders Axle Breathers - Clean/Replace
2014/12/03 An Improved Blade Extension Is Now Available for Certain 120K, 120K Series 2, 12K, 140K, and 160K Motor Graders {6173}
2014/12/16 The Exhaust Bellows Assembly has Been Updated in the New Retrofit Procedure for Certain 797 Off-Highway Trucks {1061, 1067}
2014/11/11 An Improved Assembly and Tightening Sequence is Now Available For Slide Frame and Wear Bar Mounting Bolt for 424B Backhoe Loaders {6508}
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Electronic Control (Work Tool System)
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Location of Components (Work Tool System)
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System General Information (Work Tool System)
MH3037 Material Handler Machine Systems Evaporator Coil - Remove and Install
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Gear Motor (Hydraulic Fan)
A New Latch Assembly Is Now Used on Certain G Series Off-Highway Trucks and Quarry Trucks {7308} A New Latch Assembly Is Now Used on Certain G Series Off-Highway Trucks and Quarry Trucks {7308}
MH3037 Material Handler Machine Systems Receiver Dryer (Refrigerant) - Remove and Install
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Level (Front) - Check
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Level (Rear) - Check
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Sample (Rear) - Obtain
Instructions For Installing A Heat Shield For The Battery And Circuit Box On Certain 16M Motor Graders{7513} Instructions For Installing A Heat Shield For The Battery And Circuit Box On Certain 16M Motor Graders{7513}
416F2, 420F2 and 430F2 Backhoe Loaders Lubricant Viscosities - Fluids Recommendations
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Calibration Using Display Module
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Simple Calibration
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 General Information (Calibration)
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Calibration Using Electronic Service Tool
RM500B Reclaimer Mixer Power Train Relief Valve (Charge Pressure, Left Propel Pump) - Test and Adjust