CP34 and CS34 Vibratory Soil Compactors Engine Supplement Caterpillar


Battery and Battery Cable - Separate and Connect

Usage:

CS-34 514

Removal Procedure

  1. Open the rear access door.

  2. Turn the battery disconnect switch to the OFF position.


    Illustration 1g03743028

  3. Loosen the nut and remove negative battery cable (3).

  4. Loosen the nut and remove positive battery cable (4).

  5. Loosen two nuts (2). Remove the battery hold. Remove battery (1).

Installation Procedure

  1. Install battery (1) in the reverse order of removal.

    1. Tighten nuts (2) to a torque of 7 ± 2 N·m (62 ± 18 lb in).

    2. Tighten the nut on negative battery cable (3) to a torque of 7.2 ± 1.6 N·m (64.0 ± 14.2 lb in).

    3. Tighten the nut on positive battery cable (4) to a torque of 7.2 ± 1.6 N·m (64.0 ± 14.2 lb in).

Caterpillar Information System:

RM500B Reclaimer Mixer Machine Systems Hydraulic Cylinder (Rotor Lift)
RM500B Reclaimer Mixer Machine Systems Oscillating and Steering Bar
RM500B Reclaimer Mixer Machine Systems Hydraulic Cylinder (Mixing Chamber Rear Door)
RM500B Reclaimer Mixer Machine Systems Rotor Transmission (Rotor Transmission Case and Transmission Planetary)
RM500B Reclaimer Mixer Machine Systems Lines (Steering) - Front
RM500B Reclaimer Mixer Machine Systems Lines (Steering) - Rear
RM500B Reclaimer Mixer Machine Systems Hydraulic Cylinder (Rotor Lift)
AP555F Asphalt Paver Machine Systems Check Valve
RM500B Reclaimer Mixer Machine Systems Piston Motor (Hydraulic Fan)
Command for Underground Diagnostic Codes (Automation ICM)
735C and 745C Articulated Trucks Machine Systems Brake Control Valve (Service)
Cat® Command For Hauling MID 039 - CID 3456 - FMI 03
RM500B Reclaimer Mixer Machine Systems Lines (Cab Slide Cylinder)
RM500B Reclaimer Mixer Machine Systems Lines (Mixing Chamber Front Door Cylinder) - Front
2014/11/03 The Disassembly and Assembly Manual has been Updated for Certain 793C Off-Highway Trucks {0374, 7266, 7301}
RM500B Reclaimer Mixer Machine Systems Lines (Mixing Chamber Front Door Cylinder) - Rear
2015/01/12 An Improved Accessory Drive and Compressor Air Lines Group Is Now Used On Certain 797B Off-Highway Trucks {1207}
C4.4 Engines Welding Precaution
416F2, 420F2 and 430F2 Backhoe Loaders Monitoring System
735C and 745C Articulated Trucks Hoist Control
C4.4 and C7.1 Engines Electronic Service Tools
Procedure to Update the Low Pressure Fuel System on Certain 795F AC Off-Highway Trucks {1251, 1255, 1256, 1261, 1273, 1274, 1290, 1408, 1439} Procedure to Update the Low Pressure Fuel System on Certain 795F AC Off-Highway Trucks {1251, 1255, 1256, 1261, 1273, 1274, 1290, 1408, 1439}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Disassemble - Two Speed SSL
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Assemble - Two Speed SSL
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.