2014/12/12 Caterpillar


A New Oil Filler Elbow Is Now Used on C175 Off-Highway Truck Engines {1316, 7513}

Usage:

793F AC EMD
Off-Highway Truck/Tractor:
793FSeries AC (S/N: EMD1-UP)
793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
795FSeries AC (S/N: ERM1-UP)
795F (S/N: SNT1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)

Description of Change: The new oil fill tube elbow has improved surface finish for an increased sealing capability of the oil fill cap.

Adaptable To: The new 462-6427 Oil Filler Elbow replaces the existing 378-6975 Oil Filler Elbow. The new oil filler elbow is adaptable back to first production on the serial numbers listed above.

This change is effective for the serial numbers listed in table 1.

Table 1
Effective Engine Serial Numbers    
S/N:LLM01405-UP    
S/N:B7B01947-UP    
S/N:JTL01151-UP    
S/N:A4K01023-UP    
S/N:B7C01004-UP    



Illustration 1g03728682

462-6427 Oil Filler Elbow

Caterpillar Information System:

2014/11/03 A New Fastener Group Is Now Used on Certain 797F Off Highway Truck Engines {1205, 7553}
Procedure to Install the Working at Heights Attachment on the 785C and 785D Off-Highway Trucks{0635, 7254, 7255, 7256} Procedure to Install the Working at Heights Attachment on the 785C and 785D Off-Highway Trucks{0635, 7254, 7255, 7256}
Cat® Fleet Onboard v3.x Connection Test
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Fuel System Primary Filter (Water Separator) - Replace
785G Off-Highway Truck Systems Relief Valve (Main)
C4.4 Engines Solenoid Valve - Test - Solenoid Valves that Connect to the Engine ECM
C4.4 Engines Solenoid Valve - Test - Solenoid Valves that Connect to the Dosing Control Unit (DCU)
C4.4 Engines Sensor Signal (Analog, Passive) - Test
C4.4 Engines Sensor Signal (Analog, Active) - Test
C4.4 Engines Sensor Supply - Test
C4.4 Engines Sensor Calibration Required - Test
C4.4 Engines Sensor (Data Link Type) - Test
C7 and C9 Industrial Engines Oil Contains Coolant
785G Off-Highway Truck Systems Hydraulic Tank (Brake, Brake Cooling, Hoist)
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Lift Linkage) - Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Tilt Linkage) - Replace
785G Off-Highway Truck Systems Pump Drive Shaft
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Fire Extinguisher Location
2014/09/30 A New Oil Level Gauge Group is Now Used on Certain 770G and 772G Off-Highway Trucks {1326}
MH3037 Material Handler Machine Systems Cab Riser Cylinder - Remove and Install - Forward/Back Cylinders
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Accumulator - Remove and Install
785G Off-Highway Truck Systems Metering Pump (HMU)
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Equipment Lowering with Engine Stopped
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Accumulator - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.