Front Guard - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7505 | Hydraulic Jack | 1 |
- | Steel Plate approximately |
1 |
Show/hide table
(1) | Tack weld the steel plate to the top plate of the hydraulic jack. |
Start By:
- Connect the steering frame lock.
- Position Tooling (A) and suitable cribbing under front guard (1). Raise Tooling (A) until Tooling (A) and the suitable cribbing contacts front guard (1). The weight of front guard (1) is approximately
226 kg (500 lb) . - Remove three bolts (2) (not shown) and bolts (3).
- Remove bolt (4) and the washer.
- Repeat Steps 2 and 3 for the opposite side.
Show/hide table
Do not lower the bottom guard while under the machine. Injury could occur if the bottom guard slips off of the jack while it is being lowered.
- Use Tooling (A) in order to carefully lower front guard (1).
Show/hide table
Illustration 1 | g03681181 |
Show/hide table
Illustration 2 | g03681194 |
Note: Front guard (1) may contain a significant amount of rock, dirt, liquids, and debris, which will result in significant additional weight.
- Install front guard (1) in the reverse order of removal.
Caterpillar Information System:
725C Articulated Truck Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Post Factory Installation of the Rear Radar on 834K Wheel Dozers and 988K Wheel Loaders {7347} Post Factory Installation of the Rear Radar on 834K Wheel Dozers and 988K Wheel Loaders {7347}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Parking Brake Actuator - Remove and Install
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks Interaxle Lock Supply Pressure Is High
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 13
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 06
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 05
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 03
14L Motor Grader Implement Electronic Control System MID 082 - CID 2172 - FMI 13
14L Motor Grader Implement Electronic Control System MID 082 - CID 2172 - FMI 06
14L Motor Grader Implement Electronic Control System MID 082 - CID 2172 - FMI 05
14L Motor Grader Implement Electronic Control System MID 082 - CID 2172 - FMI 03
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks Interaxle Lock Supply Pressure Is Low
725C Articulated Truck Catalyst (SCR) - Remove and Install
R2900G Load Haul Dump Machine Systems Brake Control Valve (Engine Overspeed) - Remove
Command for Underground User Management
990K Wheel Loader Systems Window Wiper and Washer
R2900G Load Haul Dump Machine Systems Brake Control Valve (Engine Overspeed) - Install
C4.4 Industrial Engine Engine Oil Pump - Remove
C4.4 Industrial Engine Engine Oil Pump - Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Relay - Test - ECM Auxiliary Input
C4.4 Engines for Caterpillar Built Machines Water Pump - Remove
C4.4 Engines for Caterpillar Built Machines Water Pump - Install
C4.4 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install