990K Wheel Loader Systems Caterpillar


Window Wiper and Washer

Usage:

990K A9P


Illustration 1g03681238
Front view of cab

Table 1
Specification for 416-0015 Window Wiper and Washer 
Item  Qty  Part  Specification Description 
12  Torque to 14 ± 2 N·m (124 ± 18 lb in)
Tighten inner nut to 13 ± 2 N·m (115 ± 18 lb in).
Tighten outer nut to 38 ± 2 N·m (28 ± 1 lb ft).
Hold inner nut steady while Tighten outer nut. 


Illustration 2g03681239
Right side view of cab

Table 2
Item  Qty  Part  Specification Description 
8T-5400 Connector As  Torque to 0.80 ± 0.15 N·m (7.08 ± 1.33 lb in)


Illustration 3g03681241
Rear view of cab

Table 3
Item  Qty  Part  Specification Description 
Torque to 7.5 ± 0.5 N·m (66.4 ± 4.4 lb in)
Torque to 9 ± 1 N·m (80 ± 9 lb in)
Use following procedure to install wiper arm.
Torque to 21 ± 1 N·m (186 ± 9 lb in).
Wait for minimum 0.5 hrs.
Again tighten to 21 ± 1 N·m (186 ± 9 lb in)


Illustration 4g03681242
Top view

Table 4
Item  Qty  Part  Specification Description 
Torque to 2.5 ± 0.5 N·m (22.1 ± 4.4 lb in)

Caterpillar Information System:

Command for Underground User Management
R2900G Load Haul Dump Machine Systems Brake Control Valve (Engine Overspeed) - Remove
725C Articulated Truck Catalyst (SCR) - Remove and Install
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks Interaxle Lock Supply Pressure Is Low
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Front Guard - Remove and Install
725C Articulated Truck Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Post Factory Installation of the Rear Radar on 834K Wheel Dozers and 988K Wheel Loaders {7347} Post Factory Installation of the Rear Radar on 834K Wheel Dozers and 988K Wheel Loaders {7347}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Parking Brake Actuator - Remove and Install
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks Interaxle Lock Supply Pressure Is High
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 13
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 06
14L Motor Grader Implement Electronic Control System MID 082 - CID 2173 - FMI 05
R2900G Load Haul Dump Machine Systems Brake Control Valve (Engine Overspeed) - Install
C4.4 Industrial Engine Engine Oil Pump - Remove
C4.4 Industrial Engine Engine Oil Pump - Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Relay - Test - ECM Auxiliary Input
C4.4 Engines for Caterpillar Built Machines Water Pump - Remove
C4.4 Engines for Caterpillar Built Machines Water Pump - Install
C4.4 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C4.4 Engines for Caterpillar Built Machines Flywheel - Remove
C4.4 Engines for Caterpillar Built Machines Flywheel - Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Relay - Test - Electric Fuel Lift Pump
2014/07/17 New Radiator Group Is Now Available on Certain 424B Backhoe Loaders {1382}
C4.4 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.