Pressure Sensor (ARD Combustion Air) - Remove and Install
- Disconnect harness assembly (1) and remove pressure sensor (2).
Show/hide table
Illustration 1 | g03656662 |
- Install pressure sensor (2) in the reverse order of removal.
Note: Do not pre-tighten the sensor using the plastic portion of the sensor. Pre-tighten the sensor using the metal hex portion of the sensor. Damage can occur to the sensor if pre-tightened using the plastic portion of the sensor.
- Tighten pressure sensor (2) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
- Tighten pressure sensor (2) to a torque of
Caterpillar Information System:
725C Articulated Truck Air Control Valve (ARD Combustion) - Remove and Install
725C Articulated Truck Voltage Load Protection Module - Remove and Install
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve (Line)
735C, 740C EJECTOR and 745C Articulated Trucks General Information
CAT MT4400D AC Off-Highway Truck Engine Supplement Muffler - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Transmission Planetary - Disassemble
735C, 740C EJECTOR and 745C Articulated Trucks Starting System - Test
826K Landfill Compactor ARD Spark Plug - Clean - Emission Related Component
432E and 434E Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 432E and 434E Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C4.4 and C7.1 Engines Shutdown - Test
Machine Electronic Control System MID 039 - CID 3894 - FMI 08
422E and 428E Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 422E and 428E Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
725C Articulated Truck Ignition Coil (ARD) - Remove and Install
Cat® Command For Hauling Site Awareness
586C Site Prep Tractor Machine Systems Combination Valve (Pilot, Brake)
Cat® Command For Hauling Perception
Cat® Command For Hauling Onboard Network
Cat® Command For Hauling Autonomous Stop
Cat® Command For Hauling Electronic Control Module
Cat® Command For Hauling Electrical Input Components
Cat® Command For Hauling Electrical Output Components
Cat® Command For Hauling General Information
Cat® Command For Hauling Service Tools
735C, 740C EJECTOR and 745C Articulated Trucks Machine Preparation for Troubleshooting