980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Tilt Cylinder

Usage:

980L D8Z


Illustration 1g03643237

Table 1
Item  Qty  Part  Specification Description 
128-9260 Bushing  Outside diameter is 100.133 ± 0.033 mm (3.9422 ± 0.0013 inch).
Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch)
170-9846 Buffer Seal  Lubricate the seal lip lightly with lubricant that is being sealed. 
216-0004 U-Cup Seal  Lubricate the seal lip lightly with lubricant that is being sealed. 
165-9288 Lip Type Seal  Lubricate the seal lip lightly with lubricant that is being sealed. 
Before assembly, apply green Loctite 609 to the wiper seal groove. 
1V-8242 Bushing  Bore is 89.185 ± 0.020 mm (3.5112 ± 0.0008 inch)
Installation depth is 10.5 ± 0.3 mm (0.41 ± 0.01 inch).
7Y-4622 Locknut  Before assembly, lubricate the face and threads. 
Torque to 5600 ± 560 N·m (4130 ± 413 lb ft).
179-9771 Ring  Lubricate inside diameter and out side diameter with clean grease. 
495-8200 Seal Ring As  Lubricate inside diameter and out side diameter with clean grease. 
10  150-5884 Ring  Lubricate inside diameter and out side diameter with clean grease. 
382-7998 Tilt Cylinder As  Bore diameter is 130.00 ± 0.08 mm (5.118 ± 0.003 inch)
382-8001 Rod As  Diameter is 94.930 ± 0.038 mm (3.7374 ± 0.0015 inch)
382-7983 Head  Bore over two lands is 95.63 ± 0.03 mm (3.765 ± 0.001 inch)
11  7Y-5215 Bolt  Torque to 900 ± 100 N·m (664 ± 74 lb ft)
12  1V-8242 Bushing  Bore is 89.185 ± 0.020 mm (3.5112 ± 0.0008 inch)
Installation depth is 9.85 ± 0.50 mm (0.388 ± 0.020 inch).

Caterpillar Information System:

424B HD Backhoe Loader Axles, Differential and Brakes Axle (Rear)
Command for Underground System Startup
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 2976 - FMI 04
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 2976 - FMI 03
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0627 - FMI 04
966M XE and 972M XE Wheel Loaders System Schematic
966M XE and 972M XE Wheel Loaders Connector Contact Description
966M XE and 972M XE Wheel Loaders ECM - Replace
966M XE and 972M XE Wheel Loaders ECM - Configure
966M XE and 972M XE Wheel Loaders ECM Software - Install
966M XE and 972M XE Wheel Loaders Wiring Harness (Short Circuit) - Test
966M XE and 972M XE Wheel Loaders Wiring Harness (Open Circuit) - Test
424B Backhoe Loader Axles, Differential and Brakes Service Brake Control
424B Backhoe Loader Axles, Differential and Brakes Parking Brake Control
C4.4 Engines for Caterpillar Built Machines Alternator
424B Backhoe Loader Axles, Differential and Brakes Wheel and Tire (Rear)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Parking Brake Control
424B Backhoe Loader Rated Load
16M Series 3 and 18M Series 3 Motor Graders Service Interval Chart
424B Backhoe Loader Hydraulic and Steering System Bucket
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Fuel Manifold (ARD) - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Machine Preparation for Troubleshooting
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pilot Oil Accumulator - Test and Charge
586C Site Prep Tractor Machine Systems Bypass Valve - Remove and Install - Cold Oil Bypass
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.