Steering Cylinder (All Wheel Drive)
Show/hide table
| |
| Illustration 1 | g03589617 |
Show/hide table
| Specifications for 384-4547 Steering Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 8T-9102 Socket Setscrew | Before assembly, apply red Loctite 271 to the threads.
Torque to |
| 2 | 1 | 9S-8002 O-Ring Plug | Torque to |
| 3 | 1 | 383-7670 Piston | Diameter (B) is |
| Torque to |
|||
| C | 1 | 389-8912 Steering Cylinder | Bore is |
| D | 1 | 389-8914 Rod As | Diameter is |
| 4 | - | 151-7038 Head | Bore over four lands (E) is |
| Before assembly, lubricate the threads with clean grease. | |||
| Torque to |
|||
| 5 | 2 | 350-3842 Setscrew | Torque to |
| 6 | 1 | 289-2935 Buffer Seal As | Lubricate the sealing lips lightly with the lubricant that is being sealed. |
| 7 | 1 | 289-2946 U-Cup Seal | Lubricate the sealing lips lightly with the lubricant that is being sealed. |
| 8 | 1 | 308-1845 Wiper Seal | Lubricate the sealing lips lightly with the lubricant that is being sealed. |
| 9 | - | - | Before assembly, apply green Loctite 609 to the wiper seal grooves. |
| 10 | 1 | 217-3312 Magnet | Before assembly, apply sealant to the threads. |
| 11 | 1 | 376-8250 Wave Spring | Before assembly, apply sealant to the threads. |
Caterpillar Information System:
Product Link 121S/300 Spare Inputs
Product Link 121S/300 System Components
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Lines
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Lines Guard
424B Backhoe Loader Lubricant Viscosities
424B HD Backhoe Loader Lubricant Viscosities
140 Motor Graders Hood - Panel
424B HD Backhoe Loader Sampling Interval and Location of Sampling Valve
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fasteners - Enclosure
424B Backhoe Loader Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
424B Backhoe Loader Sampling Interval and Location of Sampling Valve
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Tank and Mounting
Product Link 121S/300 Configuration
Product Link 121S/300 Installation Parameters Configure
Product Link 121S/300 Report Parameters Configure
Product Link 121S/300 Wireless Service Configure
Product Link 121S/300 Spare Input Configure
Product Link 121S/300 Commands
140 Motor Graders Service Brake
Product Link 121S/300 General Information
Product Link 121S/300 Service Tools
415F2 Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
416F2, 420F2 and 430F2 Backhoe Loaders Engine Oil and Filter - Change
2014/01/31 A Procedure Is Available to Avoid Temperature Fault Codes on the AP300 Asphalt Paver {7620}