725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Caterpillar


Final Drive and Wheel

Usage:

730C LFF


Illustration 1g03522936

Table 1
Specification for 322-7324 Final Drive and Wheel Gp 
Item  Qty  Part  Specification Description 
2V-5715 Terminal Bushing  Press the terminal bushing below the hub face. 
7K-6058 Bolt  Torque to 60 ± 12 N·m (44 ± 9 lb ft) and then turn an additional 120 ± 10 degrees. 
15  1A-1135 Bolt  Torque to 185 ± 20 N·m (136 ± 15 lb ft) and then turn an additional 60 ± 10 degrees. 
26  8S-9092 Bolt  Torque to 120 ± 20 N·m (89 ± 15 lb ft).
Loosen one bolt to a torque of zero. Again tighten the bolts to 120 ± 20 N·m (89 ± 15 lb ft) and then turn an additional 120 ± 10 degrees. Repeat the procedure for all the bolts in a cross-tightening sequence. 

Caterpillar Information System:

725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Secondary Steering Pump and Electric Motor
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Axle Housing
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Fuel Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hydraulic Caliper Service Brake
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Fuel Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Belt Guard
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Belt Guard
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission Planetary
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Air Lines
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Main Screen
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Differential (Drive Axle)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Brake Accumulator (Parking)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Brake Accumulator (Service)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission Control
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Solenoid Valve - Test
CB44B and CB46B Vibratory Asphalt Compactors Maintenance Interval Schedule
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Front Suspension Frame
725C, 725C2, 730C and 730C2 Articulated Truck Systems System Pressure - Release
725C, 725C2, 730C and 730C2 Articulated Truck Systems Machine Preparation for Testing and Adjusting
CB54B Vibratory Asphalt Compactor Maintenance Interval Schedule
966M Series XE and 972M Series XE Wheel Loaders Camera
730C and 730C2 EJECTOR Articulated Truck Systems Operational Checks
725C, 725C2, 730C and 730C2 Articulated Truck Systems Visual Inspection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.