1999/03/08 Caterpillar


New 150-7762 And 150-7745 (Trailer Mounted) Hot Water Pressure Washers For Cleaning Large Components {0680}

Usage:


All Models

Warranty Category: M

Features/Benefits

* Used to clean large components such as final drives and axle housings on large mining trucks
* Water pump operates from gasoline engine eliminating use of local power supply (completely independent cleaning system with no water or electrical hookups)
* Designed with a self-contained 12 volt battery, starter, and alternator
* Built-in diesel fuel water heater provides hot water for maximum cleaning efficiency
* Built-in soap injector with on/off valve is mounted inside tool box
* Heavy-duty cleaning wand has three 91 cm (36.0 in) extensions
* Assorted heads and cleaning orifices can be combined depending on cleaning applications
* Battery operated backpack sprayer and battery charger are included with 150-7762

Specifications/Technical Information

Cleaning pressure - 27560 kPa (4000 psi) at 15 Lpm (4 gpm)
Engine - 16.0 HP Briggs Vanguard
Diesel fired burner - 12 Volt
Pressure hose with reel - 30 m (100 ft)

Trailer Mounted Version

Trailer weight - 1820 kg (4000 lbs)
Water tank - 1135 L (300 gal)
Tool boxes - 2


150-7745 Washer, Hot Water (Trailer Mounted)


150-7762 Washer, Hot Water

Service Parts:

150-7746 Head, Jenz Spinner
150-7747 Head, Turbo Tip
150-7748 Repair Kit, Jenz Spinner Head
150-7749 Repair Kit, Turbo Tip
150-7750 Wand, 91 cm (36.0 in) Extension
150-7751 Gun, Wand
150-7752 Backpack Sprayer only with 150-7762
150-7753 Charger, Backpack Sprayer only with 150-7762
150-7754 Tip, 0 Degree
150-7755 Tip, 15 Degree
150-7756 Tip, 25 Degree
150-7757 Orifice, 40 Degree / 15 L (4 gpm)
150-7758 Bag Filter, Water
150-7759 Filter Element, Burner
150-7760 Filter Element, Oil
150-7761 Filter Element, Air
150-7763 Adapter (Extension Wand to Standard Orifice)
153-7093 Repair Kit, Adapter
153-9264 Hose, Pressure 30 M (100 ft)
157-7120 Gun, Standard Wand

Caterpillar Information System:

1999/03/08 Use 138-8447 Aerosol Rust Preventative As A Corrosion Inhibitor {0645}
1999/03/08 Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads {1100,0703}
1999/03/08 Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08 Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/02/22 Shielded Metal Arc Welding And Flux Cored Arc Welding Information {0679}
1999/02/08 Correct Seal Usage Improves Service Life {7555}
1999/02/01 Procedure For Assembly And Installation Of Conventional Duo-Cone Seals Is Now Available{7561}
1999/01/18 Service Literature Index For Starting Motors And Alternators {1405,1453}
1998/12/28 Use 160-0772, 160-0774/ And 160-0775 Wire Brushes For Tough Cleaning Jobs{0674}
1998/12/28 Use 1Y-3904 Clear Adhesive Sealant For O-Ring Assembly{0649}
1998/12/07 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView {1000,3000,4000,5000,6000,0788}
1998/12/07 Use 143-4062, 143-4065, 143-4066 Auto ID Pressure Sensors With DataView {1000,3000,4000,5000,6000,0788}
1999/03/08 New 152-8256 (115V) And 154-4853 (220V) Air Conditioning Refrigerant Recovery, Recycling, And Manual Recharging Station For R134A Refrigerant {7320,1809}
1999/03/15 New Top Piston Rings Available {1215}
1999/03/15 Caterpillar Prelub Troubleshooting {1400,1469}
1999/03/22 New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/29 Maximizing Off-Highway Truck Brake System Life And Improving Reliability {4251,4255}
1999/03/29 Use 160-0772, 160-0774 And 160-0775 Wire Brushes For Tough Cleaning Jobs {0674}
1999/04/12 New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12 Special Instruction, REHS0345-01, "Generator Service Literature Index" Is Available {4450}
1999/04/26 Stronger Brush Springs Improve Actuator Service Life On Flexxaire Fans{1356}
1999/04/26 Flexxaire Fan Interactive Product Guide CD Now Available{1356}
1999/04/26 Available Rebuild Options For Flexxaire Fans{1356}
1999/05/03 Revision To Special Instruction, SEHS9043, "Field Installation Of Valves For Scheduled Oil Sampling" Is Available {7542}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.