1998/08/10 Caterpillar

Use Hydraulic Torque Wrenches and Accessories for High Torque and/or Low Clearance Applications 132-8112 HY-1XLT 132-8119 HY-3XLT 132-8126 HY-5XLT 132-8133 HY-10XLT 1U-6221 HY-2XLCT 132-8159 HY-4XLCT 132-8183 HY-8XLCT 132-8206 HY-4ULC 132-8223 Power

Usage:

All Models

Warranty: M

Features/Benefits

* Can decrease bolting time by up to 75%

* Easy and safe to use

* Accurate torque to ± 3%

* The best torque-to-weight ratio available

Specifications/Technical Information

132-8112 HY-1XLT - 3/4 in Square Drive -(max. ft. lbs. 1,400)

132-8119 HY-2XLT - 1 in Square Drive -(max. ft. lbs. 3,100)

132-8126 HY-5XLT - 1 1/2 in Square Drive -(max. ft. lbs. 5,600)

132-8133 HY-10XLT - 1 1/2 in Square Drive -(max. ft. lbs. 11,200)

1U-6221 HY-2XLCT (Accessories below)

132-8143 - 36 mm Low Clearance Hex Link -(max. ft. lbs. 1,670)

1U6222 - 46 mm Low Clearance Hex Link -(max. ft. lbs. 1,670)

132-8144 - 55 mm Low Clearance Hex Link -(max. ft. lbs. 1,670)

132-8154 - 3/4 in Square Drive Link -(max ft. lbs. 1,360)

132-8159 HY-4XLCT (Accessories below)

132-8176 - 36 mm Low Clearance Hex Link -(max. ft. lbs. 3,750)

132-8177 - 46 mm Low Clearance Hex Link -(max. ft. lbs. 3,750)

132-8178 - 55 mm Low Clearance Hex Link -(max. ft. lbs. 3,750)

132-8167 - 1 in Square Drive Link -With Reaction Arm (max. ft. lbs. 3,050)

132-8183 HY-8XLCT (Accessories below)

132-8190 - 55 mm Low Clearance Hex Link -(max. ft. lbs. 7,500)

132-8191 - 65 mm Low Clearance Hex Link -(max. ft. lbs. 7,500)

132-8192 - 70 mm Low Clearance Hex Link -(max. ft. lbs. 7,500)

132-8201 - 1 1/2 in Square Drive Link -(max. ft. lbs. 6,250)

132-8206 HY-4ULC - max. ft. lbs 3,050 (Accessories below)

132-8212 - 36 mm Low Clearance Hex Link

132-8213 - 46 mm Low Clearance Hex Link

132-8214 - 55 mm Low Clearance Hex Link

132-8220 - 1 in Square Drive Link

132-8223 - 115V, 50/60 Hz, Single Phase, -Hose & Gauge Included

132-8231 - 220V, 50/60 Hz, Single Phase, -Hose & Gauge Included

132-8232 - 60-120 Psi, Hose & Gauge Included

Hydraulic Torque Wrenches and Accessories

Caterpillar Information System:

1998/08/10 Heavy-Duty 151-0968 Variable Speed, Inch, Reversing Drill now available {0600}

1998/08/03 Use 142-2285 Stress Plate for Honing Individual Engine Cylinders {1223}

1998/07/20 New Seat Belts Prevent Self Tightening and Improve Operator Comfort{7327}

1998/07/20 Priming The 144-0835 Unit Injector Hydraulic Pump{1714}

1998/07/13 Circuit Breakers Are Changing From Red To Blue Reset Buttons{1420}

1998/06/29 Re-Alignment Warning Tag On All 3500 Generator Sets Reminds Of Alignment Required At Installation {1021}

1998/06/22 New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available {0374,1250}

1998/06/22 More Frequent S·O·S Oil Analysis Improves Component Life Cycle Management {7577,7542,7576,7571,7574,7578,7575,7573}

1998/06/01 Manufacturing Process Improvement Increases Reliability Of Speed Sensors {1900}

1998/06/01 Proper Checking For Refrigerant Leaks Ensures Maximum Service Life Of Refrigerant Compressor {1802,1809,7320}

1998/05/25 New Valve Cover Seal Used {1107}

1998/08/10 Use 146-1738 Borescope for Internal Inspection of Caterpillar Products {0777}

1998/08/10 Use Recommended Repair Parts for Torque-Turn Track Wrench 5000 {4172,0602}

1998/08/10 Use 147-1758 Filter Element, 134-5901 Spares Kit, 135-6547 Auxiliary Filter, and 1R-0712 Fuel Filter to Perform Maintenance for Hartridge AVM Test Bench {1250,0782}

1998/08/17 Use 125-0201 Guide Assembly For Camshaft Installation {1202}

1998/08/17 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps {1251,1251,1000}

1998/08/17 Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}

1998/08/17 Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}

1998/08/17 Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance {1000,1000,0701}

1998/08/17 Use 148-9704 Seal Installers For High Pressure Aftercoolers {1063,7555}

1998/08/17 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface {1101}

1998/08/17 Heavy Duty, High Intensity Flashlights 149-8322 Flashlight 149-8331 Flashlight 149-8333 Flashlight 149-8334 Flashlight 149-8335 Flashlight 149-8327 Helmet Light Holder {0701}

1998/08/17 Use 148-9610 Personal Computer Cart To Hold PC, Monitor, Printer, And Data View Hardware {7600}