C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Nozzles

Usage:

CB-22B 2B2


Illustration 1g01335248
Typical example

(1) Tighten the fuel injection nozzles to the following torque. ... 64 N·m (47 lb ft)

Note: Remove the original seat washer from the hole for the fuel injector. Do not reuse the original seat washer.

Note: Apply a 2 mm (0.0787 inch) bead of 239-3312 Sealant to the first 6 mm ( 0.2362 inch) of the thread to the fuel injection nozzle.

Injector opening pressures for all models ... 14700 kPa (2132 psi)

Leakage in 10 seconds ... 0 drops

Caterpillar Information System:

C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front)
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Assemble
784C and 785C Off-Highway Truck/Tractors Relay Valve - Replace
789C Off-Highway Truck Maintenance Interval Schedule
2384C and 2484C Knuckleboom Loaders Circuit Breakers - Reset
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Cab Tilting
CD54B Vibratory Asphalt Compactor Machine Systems Gear Pump Flow - Test
CD54B Vibratory Asphalt Compactor Machine Systems Water Spray Pump Flow - Test
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051} Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051}
2012/12/21 New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump
CD54B Vibratory Asphalt Compactor Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test - Split Drum
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Manifold
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch
C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator and Regulator
C1.5 and C2.2 Engines for Caterpillar Built Machines Electric Starting Motor
CD54B Vibratory Asphalt Compactor Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test - Solid Drum
AP300D Asphalt Paver Operator Platform
2013/11/11 New Version 4.65 Firmware Is Now Available for MS952, MS972, and MS992 GPS Receivers Used On Machine Control and Guidance Products {7010}
CD54B Vibratory Asphalt Compactor Machine Systems Steering Valve Current Minimum - Calibrate
770 and 772 Off-Highway Truck Maintenance Interval Schedule
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620} Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.