559C and 579C Knuckleboom Loaders Caterpillar


Stabilizer Cylinder

Usage:

559C KAS



图 1g03226736

表 1
415-9431 稳定器油缸总成 和 415-9432 稳定器油缸总成 的技术规格    
项目     数量     零件     技术规格说明    
1     1     381-1048 锁紧螺母     拧紧至扭矩为
6780 ± 678 N·m (5000 ± 500 lb ft)。    
2     18     268-3205 螺栓     拧紧至扭矩为
146 ± 14 N·m (108 ± 10 lb ft)。
拧紧至 1/3 的规定扭矩。 再拧紧至 1/3 的规定扭矩。 然后完全拧紧至规定扭矩。 按图中所示顺序再次确认所有螺栓的扭矩。    
B     -     -     最大行程为
561.8 ± 2.3 mm (22 ± 1 in)。    
C     -     422-8867 杆组件     直径为
101.6 mm (4 in)。    
D     -     390-4737 活塞     缸径为
165.1 mm (6.5 in)。    
E     -     -     缩回长度
912.9 ± 1.5 mm (36 ± 0.1 in)。
伸长长度
1473.2 ± 2.5 mm (58 ± 0.1 in)。    

Caterpillar Information System:

Health Interface Module Setup and Configuration Guide System Setup
Alternator - Bosch K1/N1 Field Winding - Test
770G and 772G Off-Highway Trucks TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 770G and 772G Off-Highway Trucks TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
Alternator - Bosch K1/N1 Stator - Test
2012/11/27 Improved Conveyor Flashing and Retainer Plates Are Now Used on Certain Cold Planers {6620}
2013/04/30 A New Scraper Spring Is Now Used for Certain Paving Products {6607}
Alternator - Bosch K1/N1 Capacitor - Test
2012/09/25 New Automation Electronic Control Module Now Available for MINEGEM and Cat® Command for Underground Equipped Machines {7610}
2012/09/27 New Lift Arm Grease Track Protection Bar Installation Procedure Now Available for Certain Load Haul Dump Machines {6107, 7510}
2013/09/27 A New Retainer Is Now Used in the Differential Group on 793D and 793F Off-Highway Trucks {3256, 3258, 3281}
2013/04/03 A New Seal Assembly for the Differential and Bevel Gear Group Is Now Used on Certain 793 Off-Highway Trucks {3256, 3258, 3281, 7555}
559C and 579C Knuckleboom Loaders Boom Cylinder
CB44B Vibratory Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
793F AC Off-Highway Truck Hydraulic Fan and Steering System Accumulator (Steering) - Test and Charge
CB44B Vibratory Asphalt Compactor Propel System Pump Control (Electronic Displacement Control) Neutral - Test and Adjust - Split Drum
VIMSpc Update Release Information{0785, 7601} VIMSpc Update Release Information{0785, 7601}
MH3049 Material Handler Hydraulic System Relief Valve (Signal Limiter) - Test and Adjust
Field Installation of the 387-6452 Auxiliary Lines Kit , 387-6453 Auxiliary Lines Kit , and 387-6454 Auxiliary Lines Kit {5057} Field Installation of the 387-6452 Auxiliary Lines Kit , 387-6453 Auxiliary Lines Kit , and 387-6454 Auxiliary Lines Kit {5057}
2013/04/12 New Software Is Now Available for Cat® Product Link 522 Systems {7494, 7606, 7620}
2012/10/11 Correction to Custom Service Information , "254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump" {1408, 4250}
2012/10/11 Correction to Custom Service Information , "254-0328 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1600G Load Haul Dump" {1408, 4250}
2012/10/11 Correction to Custom Service Information , "351-1343 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump" {1408, 4250}
2012/10/11 Correction to Custom Service Information , "252-9310 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump" {1408, 4250}
R3000H Load Haul Dump Power Train Solenoid Valve (Transmission Clutch)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.