Electrical Enclosure (Command) - Check/Clean
Show/hide table
| |
| Illustration 1 | g03178176 |
- Park the machine on a level surface. Engage the parking brake and stop the engine.
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual , Prepare the Machine for Maintenance.
- Turn off all electrical power before performing inspection.
- Perform the following walk around inspection:
- Check that the cabinet is secure and not damaged.
- Ensure bulk head connectors and cables to the cabinet are tightly fastened, clean, and not damaged. Defective cables and connectors must be repaired or replaced.
- Remove the bolts (1) on front panel from the onboard autonomous cabinet.
- Perform the following inspection inside cabinet:
- Ensure cables and connections to the components within the cabinet are clean and not damaged. Defective cables and connectors must be repaired or replaced.
- Remove dirt from components by vacuuming or blowing out cabinet.
Caterpillar Information System:
CW14 Pneumatic CompactorEngine Supplement Engine Enclosure (Hood) - Remove and Install
793F CMD Off-Highway Trucks Air Filter (Electrical Enclosure) - Replace
793F CMD Off-Highway Trucks Battery (Electrical Enclosure) - Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Glossary of Terms
793F CMD Off-Highway Trucks Antenna (Autonomous Stop) - Check
789D and 789D XQ Off-Highway Trucks Machine Systems Plate (Cab Front) - Remove and Install
12M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove and Install
2012/09/28 Correct Installation of the Lip-Type Seal for Accessory Drives on 3500 Machine Engines {1207, 7555}
2012/08/09 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Machine Engines {1052}
CB44B and CB54B Vibratory Asphalt Compactors Engine Supplement Muffler - Remove and Install
2012/08/10 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Commercial Engines {1052}
Cat Water Delivery System (WDS) Hydraulic Oil Cooler - Clean
559C and 579C Knuckleboom Loaders Hydraulic System Pressure - Release
2012/08/27 A New Pump Coupling is Now Available for the Steering, Pilot, and Braking Pump for R2900G Load Haul Dump Machines {4268, 4306, 5085}
R3000H Load Haul Dump Power Train MID 081 - CID 0627 - FMI 03
R3000H Load Haul Dump Power Train MID 081 - CID 0627 - FMI 04
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Modulating Valve (Torque Converter Impeller Clutch)
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Propel System Propel Lines
988K Wheel Loader Systems Pressure Sensor (Torque Converter Impeller Clutch Oil)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Steering Pilot Oil)
990K Wheel Loader Systems Speed Sensor (Transmission Input)
PL83 and PL87 Pipelayer Systems Speed Sensor (Transmission Output)
Commissioning Procedure for the 793F, 793F Tier 4, and the 793F CMD Off-Highway Truck {1000, 7000, 7961} Commissioning Procedure for the 793F, 793F Tier 4, and the 793F CMD Off-Highway Truck {1000, 7000, 7961}
Commissioning Procedure For the 797F and the 797F XQ Off-Highway Truck {0374, 1000, 7000, 7961} Commissioning Procedure For the 797F and the 797F XQ Off-Highway Truck {0374, 1000, 7000, 7961}