CW14 Pneumatic CompactorEngine Supplement Caterpillar


Engine Enclosure (Hood) - Remove and Install

Usage:

CW-14 LTJ

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Brackets     2    



    Illustration 1g03178040

  1. Raise hood (1) and attach a suitable lifting device to the hood, as shown.



    Illustration 2g03178047

    ------ WARNING! ------

    Personal injury can result from parts under pressure.

    Stored energy force will be released when struts are removed.

    Support covers, hoods, or other components prior to the removal or the installation of struts.

    ----------------------

  1. Disconnect gas springs (2) from hood (1). Lower hood (1) .



    Illustration 3g01101088

  1. Remove bolt (3) and install Tooling (A) on both sides of hood (1) .



    Illustration 4g03178050

  1. Attach a suitable lifting device to hood (1). Remove the hood (1) from the machine. The weight of the hood (1) is approximately 93 kg (205 lb).

Installation Procedure

  1. Install hood (1) in the reverse order of removal.

Caterpillar Information System:

793F CMD Off-Highway Trucks Air Filter (Electrical Enclosure) - Replace
793F CMD Off-Highway Trucks Battery (Electrical Enclosure) - Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Glossary of Terms
793F CMD Off-Highway Trucks Antenna (Autonomous Stop) - Check
789D and 789D XQ Off-Highway Trucks Machine Systems Plate (Cab Front) - Remove and Install
12M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove and Install
2012/09/28 Correct Installation of the Lip-Type Seal for Accessory Drives on 3500 Machine Engines {1207, 7555}
2012/08/09 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Machine Engines {1052}
CB44B and CB54B Vibratory Asphalt Compactors Engine Supplement Muffler - Remove and Install
2012/08/10 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Commercial Engines {1052}
Cat Water Delivery System (WDS) Hydraulic Oil Cooler - Clean
Cat Water Delivery System (WDS) Fuses - Replace
793F CMD Off-Highway Trucks Electrical Enclosure (Command) - Check/Clean
559C and 579C Knuckleboom Loaders Hydraulic System Pressure - Release
2012/08/27 A New Pump Coupling is Now Available for the Steering, Pilot, and Braking Pump for R2900G Load Haul Dump Machines {4268, 4306, 5085}
R3000H Load Haul Dump Power Train MID 081 - CID 0627 - FMI 03
R3000H Load Haul Dump Power Train MID 081 - CID 0627 - FMI 04
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Modulating Valve (Torque Converter Impeller Clutch)
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Propel System Propel Lines
988K Wheel Loader Systems Pressure Sensor (Torque Converter Impeller Clutch Oil)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Steering Pilot Oil)
990K Wheel Loader Systems Speed Sensor (Transmission Input)
PL83 and PL87 Pipelayer Systems Speed Sensor (Transmission Output)
Commissioning Procedure for the 793F, 793F Tier 4, and the 793F CMD Off-Highway Truck {1000, 7000, 7961} Commissioning Procedure for the 793F, 793F Tier 4, and the 793F CMD Off-Highway Truck {1000, 7000, 7961}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.