Clean Emissions Module - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite 272 | - |
Start By:
- Remove hood
- Remove clamps (1) and clamps (2).
Show/hide table
Illustration 2 g02927628 - Remove clamp (3).
Show/hide table
Illustration 3 g02927722 - Attach a suitable lifting device to clean emissions module (4). The weight of clean emissions module (4) is approximately
163 kg (360 lb) . Remove bolts (5) and clean emissions module (4).
Show/hide table
Illustration 1 | g02927616 |
- Install clean emissions module (4) in the reverse order of removal.
- Apply Tooling (A) to bolts (5). Tighten bolts (5) to a torque of
240 N·m (175 lb ft) - Tighten clamp (3) to a torque of
35 N·m (25 lb ft) . - Tighten clamps (2) to a torque of
8.5 N·m (75 lb in) . - Tighten clamps (1) to a torque of
35 N·m (25 lb ft)
- Apply Tooling (A) to bolts (5). Tighten bolts (5) to a torque of
Caterpillar Information System:
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Solenoid Valve (Blade Control) - Test
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Line Relief Valve (Leveling Blade) - Test and Adjust
C175-16 Locomotive Engine Fuel Injector
CD44B and CD54B Vibratory Asphalt Compactors Propel System Brake and Shift Lines
CD44B and CD54B Vibratory Asphalt Compactors Propel System Drum Installation Group
CD44B and CD54B Vibratory Asphalt Compactors Propel System Drum Installation Group
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Position Sensor (Left Brake Pedal)
CD44B and CD54B Vibratory Asphalt Compactors Propel System Drum Installation Group
986H Wheel Loader Machine Systems Relief Valve
CD44B and CD54B Vibratory Asphalt Compactors Propel System Propel Pump and Mounting - Solid Drum
R3000H Load Haul Dump Steering System Steering System Pressure - Test and Adjust
R3000H Load Haul Dump Steering System Gear Pump (Secondary Steering)
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
725C2 Articulated Truck Transfer Gear Oil - Change
16M Motor Grader Ladder - If Equipped
725C2 Articulated Truck Transfer Gear Oil Filter - Replace
C175-16 Locomotive Engine Coolant Contains Fuel
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
725C2 Articulated Truck Plate Locations and Film Locations
2012/03/15 Improved Material Is Used for the CAT Film and Hydraulic Test Points Film On Certain Articulated Trucks {7405, 7557, 7563}
3516B Generator Set Engines with Dynamic Gas Blending Coolant Contains Oil
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Propel System Relief Valve (Main, Axle Propel Pump) - Test and Adjust
Cat® Grade Control for Soil Compactors Safety Messages