Fuel Injector
Show/hide table
Illustration 1 | g03368653 |
Show/hide table
Specification for 344-2927 Fuel Injector Gp | |||
Item | Qty | Part | Specification Description |
(3) | 2 | 8T-2223 Bolts | Note: Replace the bolts each time the bolts are removed. |
(6) | 2 | ||
- | - | - | Use the following special instruction in order to tighten the bolts of injectors and high-pressure line components: |
1. Apply clean engine oil to the collar of the tube joint. | |||
2. Loosen bolts (3) and (6). Then slide collar away from both ends of fuel line (2). | |||
3. Remove the fuel line (2) without contacting the ends of the fuel lines with parts on the engine. | |||
4. Install the injector (4). | |||
5. Tighten 8T-0106 Bolt (1) to a torque of |
|||
6. Loosen 8T-0106 Bolt (1) from the injector (4). | |||
7. Lubricate the Collars with clean engine oil. | |||
8. Before assembly, lubricate both ends of the fuel lines on the sealing surface (2) with clean engine oil. | |||
9. Assemble the fuel lines into the head and rail (5) without contacting the ends of the fuel lines with parts on the engine. | |||
10. Hand tighten the new bolts (3). Then hand tighten the new bolts (6). | |||
11. Tighten 8T-0106 Bolt (1) of the injector to a torque of |
|||
12. Evenly, tighten the bolts (3) to a torque of |
|||
13. Evenly, tighten the bolts (6) to a torque of |
|||
14. Tighten 8T-0106 Bolt (1) of the injector to a torque of |
|||
15. Again, evenly tighten the bolts (3) and (6) to a torque of |
|||
16. Again, evenly tighten the bolts (6) to a torque of |
Caterpillar Information System:
CD44B and CD54B Vibratory Asphalt Compactors Propel System Brake and Shift Lines
CD44B and CD54B Vibratory Asphalt Compactors Propel System Drum Installation Group
CD44B and CD54B Vibratory Asphalt Compactors Propel System Drum Installation Group
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Position Sensor (Left Brake Pedal)
CD44B and CD54B Vibratory Asphalt Compactors Propel System Drum Installation Group
986H Wheel Loader Machine Systems Relief Valve
CD44B and CD54B Vibratory Asphalt Compactors Propel System Propel Pump and Mounting - Solid Drum
R3000H Load Haul Dump Steering System Steering System Pressure - Test and Adjust
R3000H Load Haul Dump Steering System Gear Pump (Secondary Steering)
R3000H Load Haul Dump Steering System Secondary Steering System
R3000H Load Haul Dump Steering System Steering System (High Pressure Oil Circuit)
R3000H Load Haul Dump Steering System Solenoid Valve (Implement and Steering)
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Line Relief Valve (Leveling Blade) - Test and Adjust
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Solenoid Valve (Blade Control) - Test
777G Off-Highway Truck Engine Supplement Clean Emissions Module - Remove and Install
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
725C2 Articulated Truck Transfer Gear Oil - Change
16M Motor Grader Ladder - If Equipped
725C2 Articulated Truck Transfer Gear Oil Filter - Replace
C175-16 Locomotive Engine Coolant Contains Fuel
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
725C2 Articulated Truck Plate Locations and Film Locations
2012/03/15 Improved Material Is Used for the CAT Film and Hydraulic Test Points Film On Certain Articulated Trucks {7405, 7557, 7563}
3516B Generator Set Engines with Dynamic Gas Blending Coolant Contains Oil