Installation of the 2Q-8346 Alternator Air Lines Group on the 836G Landfill Compactor, 834G, and 834H Wheel Dozer {1405} Caterpillar

Landfill Compactor:

836G (S/N: BRL1-UP; 7MZ1-UP)

Wheel Dozer:

834G (S/N: BPC1-UP; 6GZ1-UP)

834H (S/N: BTX1-UP)

Introduction

This Special Instruction will provide information on the installation of 2Q-8346 Alternator Air Lines Gp .

Do not perform any procedure in this publication or order any parts until you understand the information that is contained in this publication

Show/hide table

Shut off engine and remove key before performing maintenance or repair work. Failure to do so may result in personal injury due to inadvertant machine operation. Do not start the engine or move any of the controls if there is a "Do Not Operate" or similar warning tag attached to the start switch or controls.

Parts List

Illustration 1	g02927676
Parts location for 2Q-8346 Alternator Air Lines Gp

Assembly

Illustration 2	g02928299
(A) panel

1. Begin installation of 2Q-8346 Alternator Air Lines Gp behind panel (A) .

Show/hide table



Illustration 3	g02928477
(D) Panel assembly

2. Assemble the 2Q-8346 Alternator Air Lines Gp up to the top panel assembly (D). Use the previous illustrations and parts list as your guide.

Show/hide table



Illustration 4	g02929896
(Approximate location of outlet hole)

3. Drill an outlet hole (E) in the top panel (D) that is the best location to finish assembly of 2Q-8346 Alternator Air Lines Gp . The diameter of the hose (12) that will go through the hole will be between 47.5 mm (1.87 inch) and 49.15 mm (1.935 inch). Add rain cap assembly (1), seals (2), plug button, (3), screen (13), and upper hose clamp (4) .