Usage:
RIGHT HAND MOUNTED SHOWN
(1) Diameter of valve ... 76.124 ± 0.013 mm (2.9970 ± .0005 in.)
Bore in housing for valve ... 76.200 ± 0.025 mm (3.0000 ± .0010 in.)
(2) 4N8150 Spring for oil filter bypass valves:
Length under test force ... 55.25 mm (2.175 in.)
Test force ... 76 ± 5 N (17.0 ± 1.3 lb.)
Free length after test ... 93.7 mm (3.69 in)
Outside diameter ... 20.6 mm (.81 in.)
Filter bypass valves to open with a pressure difference of ... 255 ± 20 kPa (37 ± 3 psi)
(3) Tighten studs in valve housing to a torque of ... 27 ± 4 N·m (20 ± 3 lb.ft.)
(4) Torque for studs in filter bases:
Put 9S3263 Thread Lock Compound on the threads of the studs 10.2 ± 1.5 mm (.40 ± .06 in.) from the ends that are installed in the bases.
Tighten the studs to ... 80 ± 14 N·m (60 ± 10 lb.ft.)
(5) Put clean engine oil on the filter gaskets. Put the filters in position and tighten until the gaskets make contact with the bases. Turn the filters 180° (1/2 of one turn) more.