Piston Pump (High Flow) - Remove and Install - High Flow
Removal Procedure
Show/hide table
 |
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
 |
- Raise the lift arms and position the cylinder lock (1) .
Show/hide table
 | |
| Illustration 1 | g02805598 |
- Tilt the cab.
- Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
- Disconnect hose (2) and hose assemblies (3) .
Show/hide table
 | |
| Illustration 2 | g02805636 |
- Disconnect hose assembly (4) .
Show/hide table
 | |
| Illustration 3 | g02805644 |
- Remove bolts (5). Use two people to remove piston pump (6). The weight of piston pump (6) is approximately 27 kg (60 lb).
Show/hide table
 | |
| Illustration 4 | g02805659 |
Installation Procedure
- Install piston pump (6) in the reverse order of removal.
Caterpillar Information System:
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump - Assemble - High Flow
CS54B, CS64B and CP54B Vibratory Soil Compactor Propel System Padded Shell
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump - Disassemble - High Flow
553C, 563C and 573C Wheel Feller Bunchers Power Train Pressure Charts - Hydraulic Pressures and Implement Cycle Times
CS54B, CS64B and CP54B Vibratory Soil Compactor Propel System Drum Drive Group
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove and Install
773G and 775G OFF-Highway Trucks Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove and Install - C3.3B and C2.6
CS54B, CS64B and CP54B Vibratory Soil Compactor Propel System Drum Drive Group
Product Identification Numbers (PIN) Location Guide Excavator (Mini)
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders Engine Crankcase Breather - Replace - and PCV Valve Check
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Disassemble - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Quick Coupler - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending General Information
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Cab Air Filter - Clean/Replace
773G and 775G OFF-Highway Trucks Machine Systems Cab - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Accumulator Manifold and Solenoid Mounting (Pilot Shutoff) - Remove and Install
773G and 775G OFF-Highway Trucks Machine Systems Body and Canopy - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic System
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Hydrostatic System
553C Wheel Feller Buncher Capacities (Refill)