Water Temperature Regulator Housing - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 207-1600(1) | 橡胶润滑剂 | 1 |
| 207-1601 | 橡胶润滑剂 | 1 | |
| B | 221-8647 | 油封安装工具 | |
Show/hide table
| (1) | 用于 EAME |
- 有关正确的排放和加注步骤，请参阅操作和保养手册, "冷却液 - 更换"。
Show/hide table
图 1 g02160354 - 拆下管组件 (1)。
- 拆下螺栓 (3) 和夹子。
- 断开线束组件 (4)。
- 卸下螺栓 (5)。
- 拆下水温调节器壳体 (2)。
Show/hide table
图 2 g02827396 - 拆下螺栓 (6)，然后拆下壳体 (7)。
- 拆下管 (9)，然后拆下 O 形密封圈 (8)。
Show/hide table
图 3 g02827479 - 拆下并废弃密封件 (11)。 拆下水温调节器 (10)。
Show/hide table
图 4 g02827497 - 拆下唇形密封 (12)。 记下唇形密封的方位，以便于安装。
- 按与拆卸相反的顺序安装水温调节器壳体 (2)。
- 将工具 (A) 涂抹到唇形密封 (12) 的密封圈表面上。 使用工具 (B) 安装唇形密封 (12)。
- 将工具 (A) 涂抹到 O 形密封圈 (8) 和管组件 (1) 上。
- 将水温传感器 (2) 上紧到
20 ± 3 N·m (177 ± 27 lb in) 的扭矩。
Caterpillar Information System:
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump - Disassemble - High Flow
553C, 563C and 573C Wheel Feller Bunchers Power Train Pressure Charts - Hydraulic Pressures and Implement Cycle Times
CS54B, CS64B and CP54B Vibratory Soil Compactor Propel System Drum Drive Group
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove and Install
773G and 775G OFF-Highway Trucks Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove and Install - C3.3B and C2.6
CS54B, CS64B and CP54B Vibratory Soil Compactor Propel System Drum Drive Group
Product Identification Numbers (PIN) Location Guide Excavator (Mini)
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders Engine Crankcase Breather - Replace - and PCV Valve Check
C15 and C18 Engines for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders Fuel System Filter (In-Line) - Replace
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Connector Locations
CS54B, CS64B and CP54B Vibratory Soil Compactor Propel System Padded Shell
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump - Assemble - High Flow
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump (High Flow) - Remove and Install - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Disassemble - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Quick Coupler - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending General Information
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Cab Air Filter - Clean/Replace
773G and 775G OFF-Highway Trucks Machine Systems Cab - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Accumulator Manifold and Solenoid Mounting (Pilot Shutoff) - Remove and Install
773G and 775G OFF-Highway Trucks Machine Systems Body and Canopy - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install