Snow Push Work Tool Supplement Caterpillar


Lifting and Tying Down the Machine

Usage:

236 4YZ


Lifting Point - In order to lift the work tool, attach the lifting devices to the lifting points.

Lifting The Snow Push




Illustration 1g02731143

Use properly rated cables and properly rated slings for lifting work tools. Position the crane for a level lift. Do not drag the work tool with a crane.

Use hooks in the lifting eyes (1) at the center of the rear frame and on each side plate.

Tying Down the Snow Push

Place chains or straps over the top of a section and the rear frame on both sides of the work tool.

Caterpillar Information System:

773G and 775G OFF-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
Snow Push Work Tool Supplement Operating Technique Information
Snow Push Work Tool Supplement Caterpillar Approved Work Tools - Compatibility List
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - Low Flow) (Non-Tilt
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2671 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
773G and 775G OFF-Highway Trucks Engine Supplement Water Separator and Fuel Priming Pump (Primary Fuel Filter) - Remove and Install
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid and Relief Valve (Steering)
2011/11/18 IQAN Active Studio and IQAN Develop Service Software Now Available Through Parker {1408, 7490, 7610, 7620}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 14
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Left Hand
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 04
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 08
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Right Hand
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 03
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 04
789D and 789D XQ Off-Highway Trucks Cooling System Coolant (ELC) - Change
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor - Demand Fan
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.