Exhaust Cooler (NRS) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 207-1600(1) | Rubber Lubricant | 1 |
207-1601 | Rubber Lubricant | 1 |
Show/hide table
(1) | For Use in EAME |
- Refer to Operation and Maintenance Manual, "Coolant - Change" for the proper draining and filling procedures.
Show/hide table
Illustration 1 g02730950 - Loosen clamp assembly (5) and remove bolts (1). Remove tube (4).
- Remove tube assemblies (2), (3), (6), and (7). Remove any clips and clamps.
Show/hide table
Illustration 2 g02731022 - Position harness assembly (12) out of the way.
- Disconnect tube assembly (8) and the adapter.
- Loosen clamp assembly (10) and remove bolts (9) and (14). Remove NRS exhaust cooler (11) and O-ring seal (13).
- Install exhaust cooler (11) in the reverse order of removal.
- Apply Tooling (A) to O-ring seal (13).
- Tighten clamp assembly (10) to a torque of
7.5 ± 1 N·m (66 ± 9 lb in) . - Tighten clamp assembly (5) to a torque of
8.5 ± 2 N·m (75 ± 18 lb in) .
Caterpillar Information System:
773G and 775G OFF-Highway Trucks Engine Supplement Water Separator and Fuel Priming Pump (Primary Fuel Filter) - Remove and Install
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid and Relief Valve (Steering)
2011/11/18 IQAN Active Studio and IQAN Develop Service Software Now Available Through Parker {1408, 7490, 7610, 7620}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 14
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 09
2011/12/19 An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2671 - FMI 03
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - Low Flow) (Non-Tilt
Snow Push Work Tool Supplement Caterpillar Approved Work Tools - Compatibility List
Snow Push Work Tool Supplement Operating Technique Information
773G and 775G OFF-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
Snow Push Work Tool Supplement Lifting and Tying Down the Machine
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Left Hand
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 04
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 08