1. Home
  2. Caterpillar
  3. Specifications
  4. #i04571273

521B and 522B Track Feller Bunchers Machine Systems Caterpillar


Main Control Valve (4-Bank) - Low Flow) (Non-Tilt

Usage:

521B F7B

373-7702 Main Control Valve Gp

Show/hide table
Illustration 1g03431580

Show/hide table
Table 1
Specifications for 373-7702 Main Control Valve Gp 
Item  Qty  Part  Specification Description 
1  1  378-2539 Control Valve Gp  Inlet 
2  1  378-2541 Control Valve Gp  Accumulate 
3  1  381-1520 Control Valve Gp  Swing 
4  1  378-2545 Control Valve Gp  Stick 
5  1  381-1522 Control Valve Gp  Boom 
6  1  227-2141 Control Valve Cover Gp  Outlet 
7  6  378-4631 Fastener Kit  Torque for the center nuts is 20 N·m (15 lb ft). Torque for the right nuts is 20 N·m (15 lb ft). Torque for the left nuts is 20 N·m (15 lb ft). Repeat the procedure again tighten each nut to 60 N·m (44 lb ft). Repeat the procedure again tighten each nut to 80 N·m (60 lb ft). 
A  4  Port  - 
B  4  Port  - 
C  3  Line relief  - 
D  3  Line relief  - 
E  1  Signal limiter valve  Accumulate (Open) 
F  1  Signal limiter valve  Accumulate (Close) 
G  1  Signal limiter valve  Swing (CW) 
H  1  Signal limiter valve  Swing (CCW) 
J  1  Signal limiter valve  Boom (Up) 

Show/hide table
Table 2
373-7702 Main Control Valve Gp 
Section  2  3  4  5 
Function  Accumulate  Swing  Stick  Boom 
Line Relief Setting (C)  28000 kPa (4061 psi)  -  35000 kPa (5076 psi)  35000 kPa (5076 psi) 
Line Relief Setting (D)  28000 kPa (4061 psi)  -  35000 kPa (5076 psi)  35000 kPa (5076 psi) 
Flow Rate (B)  120 L/min (32 US gpm)  180 L/min (48 US gpm)  22 L/min (6 US gpm)  100 L/min (26 US gpm) 
Flow Rate (A)  120 L/min (32 US gpm)  180 L/min (48 US gpm)  220 L/min (58 US gpm)  210 L/min (55 US gpm) 
Signal Limiter Valve (E)  22000 kPa (3191 psi)  -  -  - 
Signal Limiter Valve (F)  22000 kPa (3191 psi)  -  -  - 
Signal Limiter Valve (G)  -  27500 kPa (3988 psi)  -   
Signal Limiter Valve (H)  -  27500 kPa (3988 psi)  -   
Signal Limiter Valve (J)  -  -  -  23000 kPa (3336 psi) 

Note: All pressures are checked at the pump.

378-2539 Control Valve Group

Show/hide table
Illustration 2g02731408

Show/hide table
Table 3
Specifications for 378-2539 Control Valve Gp 
Item  Qty  Part  Specification Description 
8  1  Cap  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
9  1  Nut  Tighten 60 ± 7 N·m (44 ± 5 lb ft). 
10  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
11  1  Screw  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
12  1  Nut  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
13  1  Cap  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
14  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
15  1  Nut  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
16  4  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
17  1  Screw  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
18  1  Plug  Tighten 250 ± 20 N·m (184 ± 14 lb ft). 

378-2541 Control Valve Group

Show/hide table
Illustration 3g02731411

Show/hide table
Table 4
Specifications for 378-2541 Control Valve Gp 
Item  Qty  Part  Specification Description 
19  1  Plug  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
20  1  Screw  Tighten 1 ± 1 N·m (8 ± 8 lb in). 
21  1  Screw  Tighten 1 ± 1 N·m (8 ± 8 lb in) 
22  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
23  1  Nut  Tighten 10 ± 7 N·m (7 ± 5 lb ft). 
24  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
25  1  Relief valve  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
26  2  Cap  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
27  2  Nut  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
28  1  Relief valve  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
29  4  Screw  Tighten 3 ± 1 N·m (26 ± 8 lb in). 
30  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
31  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
32  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 

381-1520 Control Valve Gp

Show/hide table
Illustration 4g02731424

Show/hide table
Table 5
Specifications for 381-1520 Control Valve Gp 
Item  Qty  Part  Specification Description 
33  1  Plug  Tighten 100 ± 20 N·m (74 ± 15 lb ft). 
34  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
35  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
36  1  Relief Valve  Tighten 100 ± 20 N·m (74 ± 15 lb ft). 
37  2  Cap  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
38  2  Nut  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
39  1  Relief Valve  Tighten 100 ± 20 N·m (74 ± 15 lb ft). 
40  4  Screw  Tighten 3 ± 1 N·m (26 ± 8 lb in). 
41  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
42  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
43  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 

378-2545 Control Valve Group

Show/hide table
Illustration 5g02731539

Show/hide table
Table 6
Specifications for 378-2545 Control Valve Gp 
Item  Qty  Part  Specification Description 
44  1  Plug  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
45  1  Screw  Tighten 2 ± 1 N·m (17 ± 8 lb in). 
46  1  Screw  Tighten 2 ± 1 N·m (17 ± 8 lb in). 
47  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
48  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
49  1  Relief valve  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
50  1  Relief valve  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
51  4  Screw  Tighten 3 ± 1 N·m (26 ± 8 lb in). 
52  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
53  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
54  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 

381-1522 Control Valve Group

Show/hide table
Illustration 6g02731556

Show/hide table
Table 7
Specifications for 381-1522 Control Valve Gp 
Item  Qty  Part  Specification Description 
55  1  Plug  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
56  1  Screw  Tighten 1 ± 1 N·m (8 ± 8 lb in). 
57  1  Screw  Tighten 1 ± 1 N·m (8 ± 8 lb in). 
58  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
59  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 
60  1  Relief valve  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
61  2  Cap  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
62  2  Nut  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
63  1  Relief Valve  Tighten 100 ± 20 N·m (73 ± 14 lb ft). 
64  4  Screw  Tighten 3 ± 1 N·m (26 ± 8 lb in). 
65  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
66  2  Bolt  Tighten 10 ± 3 N·m (7 ± 2 lb ft). 
67  1  Plug  Tighten 30 ± 7 N·m (22 ± 5 lb ft). 

Caterpillar Information System:

793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2671 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
773G and 775G OFF-Highway Trucks Engine Supplement Water Separator and Fuel Priming Pump (Primary Fuel Filter) - Remove and Install
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid and Relief Valve (Steering)
2011/11/18 IQAN Active Studio and IQAN Develop Service Software Now Available Through Parker {1408, 7490, 7610, 7620}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 14
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 09
2011/12/19 An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
Snow Push Work Tool Supplement Caterpillar Approved Work Tools - Compatibility List
Snow Push Work Tool Supplement Operating Technique Information
773G and 775G OFF-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
Snow Push Work Tool Supplement Lifting and Tying Down the Machine
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Left Hand
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 04
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 08
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Right Hand
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 03
Back to top
Contacts My AVS
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.