148-2700 Lifting Bracket {6606} Caterpillar

Paving Compactor:

-CS-433E (S/N: CFP1-UP)

CP-533F (S/N: C5Z1-UP)

CP-663E (S/N: ASF1-UP)

CP-663E (S/N: DAF1-UP; AFL1-UP)

CS-533F (S/N: C5X1-UP)

CS-663E (S/N: ASB1-UP; AEF1-UP; DAG1-UP)

CS-683E (S/N: DAD1-UP; ASG1-UP; AGR1-UP)

Vibratory Soil Compactor:

CP-433E (S/N: CYE1-UP; CFK1-UP; ASN1-UP; BTY1-UP)

CP-533E (S/N: BZG1-UP; TLH1-UP; ASM1-UP; DAM1-UP)

CP-563E (S/N: BWE1-UP; CNT1-UP)

CP-573E (S/N: ASY1-UP; ASZ1-UP)

CP44 (S/N: MPC1-UP; M4P1-UP)

CP54 (S/N: C5T1-UP; C5Y1-UP)

CP56 (S/N: C5P1-UP; FCP1-UP)

CP64 (S/N: P7F1-UP; C6P1-UP)

CP74 (S/N: P8F1-UP; C8P1-UP)

CP76 (S/N: C7L1-UP; JCP1-UP)

CS-423E (S/N: EAE1-UP; BWG1-UP; ASH1-UP; DCL1-UP; AST1-UP; CFX1-UP)

CS-433E (S/N: DAC1-UP; CFP1-UP; ASR1-UP; BTT1-UP)

CS-533E (S/N: BZE1-UP; TBE1-UP; DAK1-UP; ASL1-UP; TJL1-UP)

CS-563E (S/N: ASA1-UP; CNG1-UP)

CS-573E (S/N: CEB1-UP; CNN1-UP)

CS-583E (S/N: CNX1-UP)

CS44 (S/N: M4C1-UP; M4S1-UP)

CS54 (S/N: C5R1-UP; C5W1-UP)

CS56 (S/N: C5S1-UP; FCS1-UP)

CS64 (S/N: C7F1-UP; C6S1-UP)

CS74 (S/N: C8F1-UP; C8S1-UP)

CS76 (S/N: JCS1-UP)

Introduction

European Union Compliant, CE Marked

Illustration 1	g02177934
The 148-2700 Lifting Bracket Assembly. European Union Compliant, CE Marked Lifting Bracket Assembly is use to lift the eccentric weights of vibrating compactors.

The 148-2700 is a vital tool in the safe and efficient assembly and disassembly of the eccentric weight housing of compactor drums. The tool helps to eliminate damage to bearings and damage to seals during assembly and disassembly of eccentric weight housing.

Anyone using the 148-2700 should read and become familiar with this manual and the safe use of this tool

Important Safety Information

Illustration 2	g02139237
Think Safety

Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.

Improper operation, lubrication, maintenance, or repair of this product can be dangerous and could result in injury or death.

Do not operate or perform any lubrication, maintenance, or repair on this product until you have read and understood the operation, lubrication, maintenance, and repair information.

Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons.

The hazards are identified by the "Safety Alert Symbol" and followed by a "Signal Word" such as "DANGER","WARNING", or "CAUTION". The Safety Alert "WARNING" label is shown below.

A non-exhaustive list of operations that may cause product damage are identified by "NOTICE" labels on the product and in this publication.

Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and on the product are, therefore, not all inclusive. If a tool, procedure, work method, or operating technique that is not recommended by Caterpillar is used, the operator must be sure that the procedures are safe. The operator must also be sure that the product will not be damaged or made unsafe by any unspecified procedures.

The information, specifications, and illustrations in this publication are based on information that was available at the time that the publication was written. The specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time. These changes can affect the service that is given to the product. Obtain the complete and most current information before you start any job.

When replacement parts are required for this product Caterpillar recommends using Caterpillar replacement parts or parts with equivalent specifications including, but not limited to, physical dimensions, type, strength, and material.

Literature Information

This manual contains safety information, operation instructions and maintenance information and should be stored with the tool group

Some photographs or illustrations in this publication may show details that can be different from your service tool. Guards and covers might have been removed for illustrative purposes.

Continuing improvement and advancement of product design might have caused changes to your service tool, which are not included in this publication.

Whenever a question arises regarding your service tool or this publication, please consult Dealer Service Tools (DST) for the latest available information.

Safety Section

The Safety section lists basic safety precautions.

Read and understand the basic precautions listed in the Safety section before operating or performing maintenance and repair on this service tool.

General Information Section

The General Information section describes tooling functions and features. The section provides useful information on individual parts, additional tooling, and resources.

Operation Section

The Operation section is a reference for the new operator and a refresher for the experienced operator.

Photographs and illustrations guide the operator through correct procedures for using the tool group.

Operating techniques outlined in this publication are basic. Skill and techniques develop as the operator gains knowledge of the service tool and tool capabilities.

Maintenance Section

The Maintenance section is a guide to tool inspection, cleaning, storage, and tool disposal

Safety Section

Safety Icon Nomenclature

Personal Protection/Important Information

Illustration 3	g02140175
Personal Protection/Important Information

Prohibited Action

Do not drill

Do not weld

Hazard Avoidance

Crushing hazard

Electrical hazard

Pinch point

Safety alert symbol

General Information Section

References

Disassembly and Assembly, KENR8176, "CP44 and CS44 Vibratory Soil Compactor Machine Systems"Disassembly and Assembly, KENR3664, "CP-533E and CS-533E Vibratory Soil Compactor Machine Systems"Disassembly and Assembly, KENR6004, "CP56, CP64, CP74, CS54, CS64, and CS74 Paving Compactors Machine Systems"Disassembly and Assembly, KENR6047, "CP54 and CS54 Vibratory Soil Compactors Machine Systems"Disassembly and Assembly, KENR3604, "CP-563E, CP573E CS-563E, CS-573E, and CS-583E Paving Compactors Machine Systems"Disassembly and Assembly, KENR3584, "CP-433E, CP-423E, and CS-433E Vibratory Compactors Machine Systems"Disassembly and Assembly, KENR6413, "CP76 and CS76 Vibratory Compactors Machine Systems"Disassembly and Assembly, KENR3664, "CP-663E, CS-663E, and CS-683E Vibratory Compactors Machine Systems"Disassembly and Assembly, KENR3574, "CP-663E, CS-663E, and CS-683E Vibratory Compactors Machine Systems"

Contact Information

For additional product support questions concerning this tool, contact the Cat Dealer Service Tools Hotline at:

Note: Continuing improvement and advancement of product design can mean some photographs or illustrations in this publication will show details that are different from your service tool.

Nomenclature

Illustration 4	g02182837
148-2700 (1) 10.5 mm (0.41339 inch) mounting holes (2) 13.8 mm (0.54331 inch) shackle hole

Operation Section

• Use only specified CAT Grade 8 bolts and hardened washers.

• Refer to Working Load Limit (WLL) stamp on link bracket for lifting capabilities.

Attaching Link Bracket

Reference manual - Refer to appropriate Disassembly and Assembly Service Manual for specific instructions on the use of link brackets.

Illustration Correct Method - Show the correct method of attaching and using link brackets.

Illustration Incorrect Method - Show the incorrect method of attaching and using link brackets.

Illustration 5	g02182993

Tighten the bolt completely against the link bracket and the eccentric to be lifted. Use only CAT Grade 8 bolts and hardened washers to attach the 148-2700 Lifting Bracket As .

Illustration 6	g02183622

Bolts of the proper length should always be used do not use spacers.

Maintenance Section

Inspection

Inspect equipment - Inspect link brackets prior to each use for nicks, burrs, dents, cracks, bent, or worn parts. If damage is found, discontinue use, destroy the tool, and depose of as scrap.

Working Load Limit (WLL) mark - Do not use link brackets unless load identification (WLL) markings are legible.

Safety alert - Do not use link brackets if mounting hole or lifting holes are elongated or deformed.

Illustration 7	g02184374

Cleaning

Clean the tool using nonsolvent based cleaners.

Storage

Store tool indoors in a dry location to prevent rust and corrosion.

Disposal

At the end of the tools operational life destory the tool and dispose of as scrap.