Axle Housing
Rear Axle Housing
Show/hide table
Illustration 1 | g02849070 |
Show/hide table
Specification for the Rear Axle Housing     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
    |     |     | Refill capacity 52 L (13.7 US gal)     |
1     | 1     | Gauge assembly     | Torque to 45 ± 6 N·m (33 ± 4 lb ft)     |
2     | 1     | Relief fitting     | Torque to 13 ± 4 N·m (9 ± 3 lb ft)     |
3     | 18     | Bolts     | Torque to 300 ± 40 N·m (220 ± 30 lb ft)     |
4     | 2     | Plug     | Torque to 13 ± 4 N·m (9 ± 3 lb ft)     |
5     | 1     | Plug     | Torque to 35 ± 4 N·m (25 ± 3 lb ft)     |
6     |
1     | Plug     | Torque drain assembly to 130 ± 10 N·m (95 ± 7 lb ft) Torque plug to 65 ± 6 N·m (50 ± 4)     |
7     | 24     | Bolts     | Torque to 300 ± 40 N·m (220 ± 30 lb ft)     |
8     | 12     | Bolts     | 105 ± 20 N·m (77 ± 15 lb ft) Turn an additional 120° ± 10°     |
9     | 24     | Bolts     | Torque to 300 ± 40 N·m (220 ± 30 lb ft)     |
10     | 4     | Bolts     | Torque to (570 ± 80 N·m)(420 ± 60 lb ft)     |
11     | 1     | Bolt     | Torque to 120 ± 20 N·m (90 ± 15 lb ft)     |
12     | 1     | Plug     | Torque to 55 ± 6 N·m (40 ± 4 lb ft)     |
Front Axle Housing
Show/hide table
Illustration 2 | g02849246 |
Show/hide table
Specification for the Front Axle Housing     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 1     | Plug     | Torque to 55 ± 6 N·m (40 ± 4 lb ft)     |
2     | 2     | Screws     | Torque to 11 ± 4 N·m (97 ± 35 lb in)     |
3     | 1     | Relief fitting     | Torque to 13 ± 4 N·m (115 ± 35 lb in)     |
4     | 2     | Plug assembly     | Torque to 90 ± 15 N·m (66 ± 11 lb ft)     |
5     | 1     | Drain assembly     | Torque assembly to 130 ± 10 N·m (95 ± 7 lb ft) Torque plug to 65 ± 6 N·m (48 ± 4 lb ft) 25 mm (1 inch) NPTF pipe needed to activate the valve for draining     |
6     | 24     | Bolts     | Torque to 300 ± 40 N·m (220 ± 30 lb ft)     |
7     | 3     | Plugs     | Torque to 35 ± 4 N·m (25 ± 3 lb ft)     |
8     | 10     | Bolts     | Torque to 300 ± 40 N·m (220 ± 30 lb ft)     |
9     | 24     | Bolts     | Torque to 300 ± 40 N·m (220 ± 30 lb ft)     |
10     | 1     | Bolt     | Torque to 120 ± 20 N·m (90 ± 15 lb ft)     |
11     | 1     | Gauge assembly     | Torque to 45 ± 6 N·m (33 ± 4 lb ft)     |
Front and Rear Axle Mounting Groups
Torques for mounting the front and rear axle housings.
Show/hide table
Illustration 3 | g02849191 |
Front axle arrangement |
Show/hide table
Illustration 4 | g02849199 |
Rear axle arrangement |
Show/hide table
Specification for the 355-4171 Axle Mounting Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 8     | 7X-2476 Bolts     | 800 ± 100 N·m (590 ± 74 lb ft)     |
2     | 8     | 116-2434 Bolts     | 1000 ± 125 N·m (738 ± 92 lb ft)     |
Caterpillar Information System:
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Maintenance Interval Schedule
2010/07/08 Correction to Operation and Maintenance Manual , "Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace" {7320, 7342}
AS3301C Asphalt Screed Screed Plate
2010/06/30 Improved Ride Control Solenoid Valve Now Used on Certain Small Wheel Loader Machines {5004, 5054, 5479}
2013/02/21 New Hydraulic Oil Filter Element Assembly Is Now Used on 797B Off-Highway Trucks {4304, 5068}
242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
2010/11/03 New Hose Reducers for The ATAAC are Now Used on Certain Cold Planers {1071}
Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201} Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201}
773G and 775G Off-Highway Truck Fast Fill Service Center - If Equipped
AS3301C Asphalt Screed Screed Frame
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Electronic Control Module (ECM) - Flash Program
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Power Supply Circuit of Electronic Control Module
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Features
2010/10/20 A New Plastic Wear Pad Is Now Available for the Lift Arm Group on 414E Industrial Loader Machines {6119, 6820}
2010/08/06 Improved Control Valve Group Available for Certain Compact Track Loader, Multi Terrain Loader, and Skid Steer Loader Machines {5051}
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
793F Off-Highway Truck Chassis Electronic Control System Command For Hauling Switch Circuits
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Assemble
AS3301C Asphalt Screed Wiring (Screed Heater)
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Brake Cooling) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Brake Cooling) - Assemble
795F AC Off-Highway Truck Automatic Lubrication System (For Electric Start Equipped Trucks) General Information
773E Off-Highway Truck Fuel System - Prime