Improved Ride Control Solenoid Valve Now Used on Certain Small Wheel Loader Machines {5004, 5054, 5479}
- Integrated Toolcarrier:
- IT28G (S/N: WAC1-UP)
- Wheel Loader:
- 924G (S/N: DDA1-UP)
- IT28G (S/N: 8CR1-UP; 9AR1-UP; DBT1-UP)
- 924G (S/N: RBB1-UP; WMB1-UP; AAN1-UP; 9SW1-UP; 3PZ1-UP)
- 924GZ (S/N: RTA1-UP; AAB1-UP; 6YW1-UP; WGX1-UP; DFZ1-UP; 3DZ1-UP)
- 928G (S/N: DJD1-UP; WLG1-UP; 6XR1-UP; 7SR1-UP)
- 928HZ (S/N: BYD1-UP; CXK1-UP)
- 930G (S/N: TWR1-UP; TFW1-UP)
Description of Change: An improved ride control valve is now used on certain small Wheel Loader machines. The new solenoid valve features a sealed coil assembly and an integral connector. These features provide improved sealing from moisture, thereby, increasing durability and extending service life.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g02175691 |
New 329-5064 Solenoid Valve Gp | |
Show/hide table
| Model | Serial Number | Previous Solenoid Valve | Improved Solenoid Valve |
|---|---|---|---|
| 924G | S/N:DDA2991-UP | 201-0950 | 329-5064 |
| S/N:RTA606-UP | |||
| S/N:WGX1095-UP | |||
| S/N:WMB1134-UP | |||
| S/N:RBB1371-UP | |||
| 928G | S/N:DJD2451-UP | ||
| S/N:WLG1007-UP | |||
| 928H | S/N:BYD1-401 | ||
| S/N:CXK1-770 | |||
| 924G | S/N:3DZ895-UP | 171-8775 | 329-5064 |
| S/N:3PZ1343-UP | |||
| S/N:6YW864-UP | |||
| S/N:9SW2027-UP | |||
| S/N:AAB452-UP | |||
| S/N:AAN1068-UP | |||
| S/N:DDA1-2990 | |||
| S/N:DFZ1-UP | |||
| S/N:RBB1-1370 | |||
| S/N:RTA1-605 | |||
| S/N:WGX1-1094 | |||
| S/N:WMB1-1143 | |||
| 928G | S/N:6XR3570-UP | ||
| S/N:DJD1-2450 | |||
| S/N:7SR2189-UP | |||
| S/N:WLG1-1006 | |||
| IT28G | S/N:8CR3806-UP | ||
| S/N:DBT1-UP | |||
| S/N:9AR1139-UP | |||
| S/N:WAC1-UP | |||
| 930G | S/N:TWR1-2722 | 171-8775 | 329-5064 (1) |
| S/N:TFW1-671 | |||
| 930G | S/N:TWR2723-UP | 201-0950 | 329-5064 (1) |
| S/N:TFW672-UP |
Show/hide table
| ( 1 ) | Requires 230-7654 Wiring Harness |
Note: 930G machines require a 230-7654 Wiring Harness when the solenoid valve is replaced.The new 329-5064 Solenoid Valve Gp is effective in production on 928H (S/N: BYD402-UP; CXK771-UP).
Caterpillar Information System:
2013/02/21 New Hydraulic Oil Filter Element Assembly Is Now Used on 797B Off-Highway Trucks {4304, 5068}
242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
2010/11/03 New Hose Reducers for The ATAAC are Now Used on Certain Cold Planers {1071}
Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201} Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201}
773G and 775G Off-Highway Truck Fast Fill Service Center - If Equipped
AS3301C Asphalt Screed Screed Frame
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Electronic Control Module (ECM) - Flash Program
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Power Supply Circuit of Electronic Control Module
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Electronic Control Module (ECM) - Configure
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G MID 161 - CID 0590 - FMI 09
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G MID 161 - CID 1273 - FMI 09
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G MID 161 - CID 0890 - FMI 09
AS3301C Asphalt Screed Screed Plate
2010/07/08 Correction to Operation and Maintenance Manual , "Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace" {7320, 7342}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Maintenance Interval Schedule
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Axle Housing
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Features
2010/10/20 A New Plastic Wear Pad Is Now Available for the Lift Arm Group on 414E Industrial Loader Machines {6119, 6820}
2010/08/06 Improved Control Valve Group Available for Certain Compact Track Loader, Multi Terrain Loader, and Skid Steer Loader Machines {5051}
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
793F Off-Highway Truck Chassis Electronic Control System Command For Hauling Switch Circuits
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Assemble
AS3301C Asphalt Screed Wiring (Screed Heater)