Screed Plate
Show/hide table
Illustration 1 | g02175467 |
Top view |
Show/hide table
Specification for 353-2584 Screed Plate Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 353-1639 Heater As     | Before you install the heater assemblies on the screed plates, apply 10 mm (0.4 inch) wide and 5 mm (0.2 inch) thick bead of 257-8023 Thermal Grease to bottom of the heater assemblies.     |
2     | 1     | 352-6133 Heater As     | |
-     | -     | As required, use the following shims.     | |
3     | 8     | 8I-0888 Shim     | Thickness is 0.254 mm (0.0100 inch).     |
4     | 12     | 8I-0889 Shim     | Thickness is 0.508 mm (0.0200 inch).     |
5     | 8     | 8I-0890 Shim     | Thickness is 1.626 mm (0.0640 inch).     |
Show/hide table
Illustration 2 | g02527403 |
Section A-A |
Show/hide table
Specification for 353-2584 Screed Plate Gp     | |||
Item     | Qty     | Part     | Specification Description     |
6     | 12     | 8I-0189 Stud     | Apply Loctite 272 to the threads of the studs.     |
7     | 24     | 290-4724 Stud     | Apply Loctite 272 to the threads of the studs.     |
8     | 24     | 290-4723 Adjustment Nut     | Before assembly, coat the threads of the adjustment nuts with black 4C-5599 Anti-Seize Compound.     |
9     | 16     | 5C-6565 Bolt     | Apply Loctite 272 to the threads of the bolts.     |
10     | 12     | 6V-8188 Nut     | Torque to 70 ± 12 N·m (52 ± 9 lb ft).     |
11     | -     | -     | Back edge of the frame should not extend past back edge of the screed plate.     |
B     | -     | -     | Gap between screed plate and the nose bar is 0.0 to 1.5 mm (0.00 to 0.06 inch).     |
C     | -     | -     | Set the nose bar to be 0.0 to 0.8 mm (0.00 to 0.03 inch) below the screed plate.     |
D     | -     | -     | The gap between the deflector and the screed plate is 12.8 ± 1.5 mm (0.50 ± 0.06 inch).     |
Caterpillar Information System:
2010/06/30 Improved Ride Control Solenoid Valve Now Used on Certain Small Wheel Loader Machines {5004, 5054, 5479}
2013/02/21 New Hydraulic Oil Filter Element Assembly Is Now Used on 797B Off-Highway Trucks {4304, 5068}
242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
2010/11/03 New Hose Reducers for The ATAAC are Now Used on Certain Cold Planers {1071}
Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201} Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201}
773G and 775G Off-Highway Truck Fast Fill Service Center - If Equipped
AS3301C Asphalt Screed Screed Frame
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Electronic Control Module (ECM) - Flash Program
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Power Supply Circuit of Electronic Control Module
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Electronic Control Module (ECM) - Configure
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G MID 161 - CID 0590 - FMI 09
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G MID 161 - CID 1273 - FMI 09
2010/07/08 Correction to Operation and Maintenance Manual , "Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace" {7320, 7342}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Maintenance Interval Schedule
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Axle Housing
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735B, 735C, 740B, 740B Ejector, 740C Ejector and 745C Articulated Trucks VIMSTM 3G Features
2010/10/20 A New Plastic Wear Pad Is Now Available for the Lift Arm Group on 414E Industrial Loader Machines {6119, 6820}
2010/08/06 Improved Control Valve Group Available for Certain Compact Track Loader, Multi Terrain Loader, and Skid Steer Loader Machines {5051}
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
793F Off-Highway Truck Chassis Electronic Control System Command For Hauling Switch Circuits
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Hydraulic Fan, Steering) - Assemble
AS3301C Asphalt Screed Wiring (Screed Heater)
797F and 797F XQ Off-Highway Trucks Machine Systems Piston Pump (Brake Cooling) - Disassemble