C4.4 Industrial Engine Caterpillar


Engine Oil Pressure

Usage:

C4.4 448
The minimum oil pressure at a maximum engine speed of 2200 rpm and at normal operating temperature is the following value. ... 280 kPa (40 psi)

Caterpillar Information System:

C4.4 Industrial Engine Engine Oil Pump - Inspect
C4.4 Industrial Engine Engine Oil Pressure - Test
795F AC Off-Highway Truck Automatic Lubrication System (For Electric Start Equipped Trucks) Lubrication Injector Banks - Adjust
Product Link - PL522/523 Reports and Messages Not Available
795F AC Off-Highway Truck Automatic Lubrication System (For Electric Start Equipped Trucks) Electrical System - Test
Product Link - PL522/523 Electronic Service Tool Does Not Communicate with ECM
Product Link - PL522/523 Event Code List
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) Connector Contact Description
All Motor Graders Are Now Shipped With Front Axle Wheel Lean Bar Pinned{3282, 4305, 4313, 5225} All Motor Graders Are Now Shipped With Front Axle Wheel Lean Bar Pinned{3282, 4305, 4313, 5225}
C4.4 Industrial Engine Engine - Clean
XQ125 Generator Set Trailer - Inspect
795F AC Off-Highway Truck Automatic Lubrication System (For Electric Start Equipped Trucks) Lubrication System
2010/10/06 A New Right-hand Handrail Assembly Improves the Handrail Group on the 777F Off-Highway Truck {7256}
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Product Link - PL522/523 Position Reports Not Available
Product Link - PL522/523 Reporting Interval Erratic
AP555E and BG555E Asphalt Pavers Machine Systems Electric Motor (Washdown Pump) - Remove and Install
Product Link - PL522/523 Diagnostics and Events Not Available
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057} Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Product Link - PL522/523 Operating Hours Discrepancy
450E Backhoe Loader Machine Electronic Control System Data Link
Product Link - PL522/523 Diagnostic Code List
Product Link - PL522/523 MID 161 - CID 0168 - FMI 00
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.