Flywheel Housing Runout
Usage:
Face Runout (Axial Eccentricity) Of The Flywheel Housing:
8T5096 Dial Indicator Group Installed (Typical Example)
1. Fasten a dial indicator to the crankshaft flange so the anvil of the indicator will touch the face of the flywheel housing.
2. Put a force on the crankshaft toward the rear before reading the indicator at each point.
3. With dial indicator set at 0.0 mm (.000 in) at location (A), turn the crankshaft and read the indicator at locations (B), (C), and (D).
4. The difference between lower and higher measurements taken at all four points must not be more than 0.30 mm (.012 in), which is the maximum permissible face runout (axial eccentricity) of the flywheel housing.
Caterpillar Information System:
3114 & 3116 DIESEL TRUCK ENGINES Flywheel Runout
3114 & 3116 DIESEL TRUCK ENGINES Flywheel Housing
3114 & 3116 DIESEL TRUCK ENGINES Flywheel
3114 & 3116 DIESEL TRUCK ENGINES Balancer Group 3114 Engine
3114 & 3116 DIESEL TRUCK ENGINES Front Housing
3114 & 3116 DIESEL TRUCK ENGINES Front Gear Group
3114 & 3116 DIESEL TRUCK ENGINES Connecting Rod And Main Bearing Journals
3114 & 3116 DIESEL TRUCK ENGINES Pistons And Rings
3114 & 3116 DIESEL TRUCK ENGINES Connecting Rods
3114 & 3116 DIESEL TRUCK ENGINES Crankshaft Pulley
3114 & 3116 DIESEL TRUCK ENGINES Crankshaft
3114 & 3116 DIESEL TRUCK ENGINES Crankshaft Seals
3114 & 3116 DIESEL TRUCK ENGINES Flywheel Housing Bore
3114 & 3116 DIESEL TRUCK ENGINES Starting Motor 7X5987
3114 & 3116 DIESEL TRUCK ENGINES Alternator 9X6796
3114 & 3116 DIESEL TRUCK ENGINES Regulator
3114 & 3116 DIESEL TRUCK ENGINES Circuit Breaker
3114 & 3116 DIESEL TRUCK ENGINES Fuel Shutoff Solenoid
3114 & 3116 DIESEL TRUCK ENGINES Wiring Connections For Fuel Shutoff Solenoid Nonlatching Type (ETR)
3114 & 3116 DIESEL TRUCK ENGINES Air Heater Wiring
3114 & 3116 DIESEL TRUCK ENGINES Fan Drive Sensor
3114 & 3116 DIESEL TRUCK ENGINES Air Compressor
3114 & 3116 DIESEL TRUCK ENGINES Systems Operation
3114 & 3116 DIESEL TRUCK ENGINES Testing And Adjusting