Declaration of Conformity
Show/hide table
| An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. | ||||||
| EC DECLARATION OF CONFORMITY OF MACHINERY | ||||||
| Manufacturer:
Caterpillar Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA |
||||||
| Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: | ||||||
| Standards & Regulations Manager, Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France |
||||||
| I, the undersigned, _________, hereby certify that the construction equipment specified hereunder | ||||||
| Description: | Generic Denomination: | Earth-moving Equipment | ||||
| Function: | Wheel Loader | |||||
| Model/Type: | 914G Wheel Loader, IT14G Integrated Tool Carrier | |||||
| Serial Number: | ||||||
| Commercial Name: | Caterpillar
|
|||||
| Fulfils all the relevant provisions of the following Directives | ||||||
| Directives | Notified Body | Document No. | ||||
| 2006/42/EC | N/A | |||||
| 2000/14/EC amended by 2005/88/EC, Note (1) | ||||||
| 2004/108/EC | N/A | |||||
| Note (1) | Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File |
|||||
| Done at: | Signature | |||||
| Date: | Name/Position | |||||
| Note: The above information was correct as of October 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. | ||||||
Caterpillar Information System:
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 0352 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Electrical Connectors
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Cab - Install
793F Off-Highway Truck Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Assemble
793F Off-Highway Truck Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Disassemble
Proper Storage Procedures for Commercial Engines {0355, 1000} Proper Storage Procedures for Commercial Engines {0355, 1000}
793F Off-Highway Truck Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Position Sensor for the Joystick Control (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Position Sensor for the Lift Linkage (Electronic Technician) - Calibrate
773F and 775F Off-Highway Truck Power Train Position Sensor (Transmission Control)
2009/11/05 A New Transmission Harness and a New Position Sensor Group Are Now Used on Certain Cat Products {1408, 1439, 3167}
797F and 797F XQ Off-Highway Trucks Towing the Machine
2009/10/23 An Updated Piston Is Now Used in the Lift Cylinders on Medium Wheel Loader {5102}
797F and 797F XQ Off-Highway Trucks Towing With Power Train Failure
797F and 797F XQ Off-Highway Trucks Engine Starting with an External Air Supply - If Equipped with Air Starting Arrangement
C7.1 Industrial Engine and Generator Set NRS Exhaust Gas Temperature Is High
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System Emerging Symptom Information
Filtration Procedure for 793F, 795F, & 797F Off-Highway Truck Steering Oil {0680, 0732, 0738, 0768, 4300, 5050, 5056} Filtration Procedure for 793F, 795F, & 797F Off-Highway Truck Steering Oil {0680, 0732, 0738, 0768, 4300, 5050, 5056}
793F Off-Highway Truck Machine Systems Screen (Hoist Pump) - Remove and Install
793F Off-Highway Truck Machine Systems Control Valve (Hoist) - Remove and Install
797F and 797F XQ Off-Highway Truck/Tractor Braking System Operational Checks
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553} Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
797F and 797F XQ Off-Highway Trucks Engine Starting with Jump Start Cables
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102} Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}