795F AC and 795F AC XQ Off-Highway Trucks Caterpillar


Air Cooling Duct - Check/Clean - Outlet Screens

Usage:

795F AC ERM

  • 准备维修的机器。 请参阅操作和保养手册, "使机器作好保养准备"。


    图 1g01805974

  • 检查发电机出口滤网 (1), 终传动油冷却器滤网 (2) 和 后桥出口滤网 (3) 有无可能堵塞空气流动的污垢和碎屑。

  • 必要时,采用压缩空气或真空清洁法清除出口滤网上的污垢和碎屑。
  • Caterpillar Information System:

    CP44 and CS44 Vibratory Soil Compactors Isolation Mounts - Inspect
    2009/03/02 An Improved Turbine Type Air Starting Motor Is Available for the 793D {1451}
    584 and 584HD Forwarders Machine Preheater Preheater Troubleshooting
    CP44 and CS44 Vibratory Soil Compactors Lifting and Tying Down the Machine
    3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Event Codes
    CP44 and CS44 Vibratory Soil Compactors Engine Air Filter Service Indicator - Inspect
    584 and 584HD Forwarders Machine Preheater Machine Preparation for Troubleshooting
    CP44 and CS44 Vibratory Soil Compactors Fuel System Secondary Filter - Replace
    CP44 and CS44 Vibratory Soil Compactors Fuel System Primary Filter (Water Separator) - Replace
    2009/03/30 Introduction of a New Fuel Filter Base {1260, 1261}
    2009/03/30 Introduction of a New Fuel Filter Base {1260, 1261}
    2009/02/09 Improvement to the Oil Pressure Switch {7400, 7421}
    2009/04/27 A New Fan Adapter Is Now Used {1359}
    2009/02/09 New Latches are Now Available for Certain Motor Grader Doors {7308}
    2009/02/23 Correction to Specifications , "Torque Converter and Updrive" {3101, 3159}
    The Battery May Discharge Slowly Over Time With Nonuse{1401} The Battery May Discharge Slowly Over Time With Nonuse{1401}
    Work Tool (Custom) <B>341-1859</B> Pallet Fork Safety Messages
    2009/08/03 An Improved Bucket Cylinder is Being Used On Certain Backhoe Loaders {5457}
    Work Tool (Custom) <B>341-1859</B> Pallet Fork Plate Locations and Film Locations
    Work Tool (Custom) <B>341-1859</B> Pallet Fork Work Tool Installation and Removal
    3408E and 3412E Engines for Caterpillar Built Machines ECM/Personality Module - Test
    MINEGEM Machine Control ; Guidance Products Maintenance Interval Schedule
    R1600G Load Haul Dump Lifting and Tying Down the Machine
    3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Throttle Lock - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.