Difficulty in Accessing the Grease Zerks on 414E Backhoe Loaders{7054, 7120}
- Backhoe Loader:
- 414E (S/N: ELB1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Show/hide table
Illustration 1 | g01597164 |
There are two grease zerks on the 316-1060 Pivot Arm Gp . See Illustration 1.
Show/hide table
Illustration 2 | g01597253 |
The two grease zerks are very difficult to access. The limited space between the 316-1060 Pivot Arm Gp and the cab floor prevents the nipple of a standard grease gun from fitting onto the grease zerks. See Illustration 2.
Solution
Show/hide table
Parts List     | |||
---|---|---|---|
Item     | Quantity     | Part Number     | Description     |
1     | 2     | 6K-6967     | Pipe Adapter     |
2     | 2     | 3B-8488     | Grease Fitting     |
Show/hide table
Illustration 3 | g01597257 |
Replace each of the existing grease zerks with one adapter (1) and one grease fitting (2). See Illustration 3.
Caterpillar Information System:
AP600D Asphalt Paver Machine Systems Location Of Components (Generator System)
AP600D Asphalt Paver Machine Systems Electrical Schematic (Generator System)
2009/03/30 The Installation of the Shim Pack is Updated for the Front Wheel Bearing {3259, 4201, 4205}
PL61 Pipelayer Machine Systems Hook Winch - Disassemble
320D and 323D Excavators Machine System Specifications Accumulator (Pilot)
AP600D Asphalt Paver Machine Systems Operator Controls (Generator)
2008/07/21 Improvements Have Been Made to the Caterpillar Monitoring System {7450, 7451, 7490}
AP600D Asphalt Paver Machine Systems Hydraulic Schematic (Generator System)
AP600D Asphalt Paver Machine Systems General Information (Generator System)
Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332} Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332}
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
2008/08/25 Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
AP600D Asphalt Paver Machine Systems Piston Pump (Generator)
AP600D Asphalt Paver Machine Systems Control Valve (Generator)
AP600D Asphalt Paver Machine Systems Piston Motor (Generator)
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Swing Motor Case Drain Oil - Measure
994F Wheel Loader Restricted Visibility
785D OEM Off-Highway Truck Machine Systems Check Valve (Secondary Air Tank) - Remove and Install
1390 Track Feller Buncher Piston Pump (Constant Horsepower Flow Control) - Test and Adjust
785D OEM Off-Highway Truck Machine Systems Check Valve (Service Brake) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Double) - Disassemble
785D OEM Off-Highway Truck Machine Systems Check Valve (Double) - Assemble
Procedure to Install New Step Brackets {1273, 7254} Procedure to Install New Step Brackets {1273, 7254}
785D OEM Off-Highway Truck Machine Systems Inverter Valve (Secondary Brake) - Remove