Valve Seat Inserts
Usage:
Remove Valve Seat Inserts
Start By:
a. remove valves
1. Remove the valve seat inserts from the cylinder head with tooling (A).
2. Clean and remove any burrs from the valve seat bores.
Install Valve Seat Inserts
1. Lower the temperature of valve seat inserts (1), and install them with tooling (A).
Show/hide table
NOTICE |
---|
Do not make the diameter of the extractor larger when the insert is installed or damage to the insert and cylinder head can be the result. |
2. Grind valve seat inserts (1) to the values given in Specifications.
End By:
a. install valves
Caterpillar Information System:
3516 MARINE ENGINE Bridge Dowels
3516 MARINE ENGINE Valve Lifters
3516 MARINE ENGINE Valves
3516 MARINE ENGINE Piston Cooling Jets
3516 MARINE ENGINE Cylinder Head Assemblies
3516 MARINE ENGINE Fuel Injection Control Linkage
3516 MARINE ENGINE Fuel Injectors
3516 MARINE ENGINE Rocker Shaft Assemblies
3516 MARINE ENGINE Rocker Shaft Assemblies And Push Rods
3516 MARINE ENGINE Valve Covers
3516 MARINE ENGINE Flywheel Housing
3516 MARINE ENGINE Flywheel
3516 MARINE ENGINE Valve Guides
3516 MARINE ENGINE Connecting Rod Bearings
3516 MARINE ENGINE Rear Gear Group
3516 MARINE ENGINE Spacer Plates
3516 MARINE ENGINE Crankshaft Main Bearings
3516 MARINE ENGINE Piston And Connecting Rod Assemblies
3516 MARINE ENGINE Cylinder Liners
3516 MARINE ENGINE Camshafts
3516 MARINE ENGINE Camshaft Bearings
MODEL MG 5050 MARINE TRANSMISSION Marine Transmission
MODEL MG 5050 MARINE TRANSMISSION Systems Operation
MODEL MG 5050 MARINE TRANSMISSION Introduction