Bridge Dowels
Usage:
Remove And Install Bridge Dowels
Start By:
a. remove valves
1. If necessary, use tooling (A) to remove bridge dowels (1) from the cylinder head.
2. Use tool (B) and a hammer to install dowels (1) in the cylinder head. The dowels must extend 66.5 ± 0.5 mm (2.62 ± .02 in.) above the head surface.
End By:
a. install valves
Caterpillar Information System:
3516 MARINE ENGINE Valve Lifters
3516 MARINE ENGINE Valves
3516 MARINE ENGINE Piston Cooling Jets
3516 MARINE ENGINE Cylinder Head Assemblies
3516 MARINE ENGINE Fuel Injection Control Linkage
3516 MARINE ENGINE Fuel Injectors
3516 MARINE ENGINE Rocker Shaft Assemblies
3516 MARINE ENGINE Rocker Shaft Assemblies And Push Rods
3516 MARINE ENGINE Valve Covers
3516 MARINE ENGINE Flywheel Housing
3516 MARINE ENGINE Flywheel
3516 MARINE ENGINE Front Drive Housing
3516 MARINE ENGINE Valve Seat Inserts
3516 MARINE ENGINE Valve Guides
3516 MARINE ENGINE Connecting Rod Bearings
3516 MARINE ENGINE Rear Gear Group
3516 MARINE ENGINE Spacer Plates
3516 MARINE ENGINE Crankshaft Main Bearings
3516 MARINE ENGINE Piston And Connecting Rod Assemblies
3516 MARINE ENGINE Cylinder Liners
3516 MARINE ENGINE Camshafts
3516 MARINE ENGINE Camshaft Bearings
MODEL MG 5050 MARINE TRANSMISSION Marine Transmission
MODEL MG 5050 MARINE TRANSMISSION Systems Operation