Relief Valve (Transmission Main) - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-1853     | 挡圈钳     | 1     |
开始:
- 拆下主安全阀。
- 将接头 (2) 和 O 形密封圈从安全阀 (1) 上拆下。
Show/hide table
图 1 | g01431844 |
- 拆下塞 (3) 。
Show/hide table
图 2 | g01431848 |
- 将 O 形密封圈 (4) 从螺塞 (3) 上拆下。
Show/hide table
图 3 | g01431853 |
- 将缓动阀 (5) 从安全阀 (1) 上拆下。
Show/hide table
图 4 | g01431857 |
- 拆下螺栓 (6) 和垫圈以拆下调整盖 (7) 。
Show/hide table
图 5 | g01431947 |
- 从调整盖 (7) 上拆下 O 形密封圈 (8) 。
Show/hide table
图 6 | g01431949 |
- 拆下螺栓 (9) 和垫圈。 将盖 (10) 从安全阀 (1) 上拆下。
Show/hide table
图 7 | g01431957 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 为便于安装,记录螺栓 (11) 的长度。 如有必要,将螺栓 (11) 从盖 (10) 上拆下。
Show/hide table
图 8 | g01431958 |
- 将 O 形密封圈 (12) 从安全阀 (1) 上拆下。
Show/hide table
图 9 | g01431960 |
- 拆下止动块 (14) 和弹簧 (13) 。
Show/hide table
图 10 | g01431963 |
- 从安全阀 (1) 上拆下滑阀 (15) 。
Show/hide table
图 11 | g01431971 |
- 利用工具 (A) 将挡圈 (16) 从滑阀 (15) 上拆下。
Show/hide table
图 12 | g01431978 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 从滑阀 (15) 上拆下挡圈 (19) 、弹簧 (18) 和钢珠 (17) 。
Show/hide table
图 13 | g01431992 |
- 将节流孔螺塞 (20) 从滑阀 (15) 上拆下。
Show/hide table
图 14 | g01432001 |
Caterpillar Information System:
PM-201 Cold Planer Machine Systems Gear Pump (First, Second Stage Conveyor) - Install
PM-201 Cold Planer Machine Systems Gear Pump (First, Second Stage Conveyor) - Remove
2007/11/12 New Load Control Valves are Available on the Boom and Stick Hydraulic Circuits {5811}
2008/02/25 Improved Walkways, Handrails and Mirrors are Now Available {7254, 7255, 7256, 7319}
Topcon® System Five Additional Messages
24M Motor Grader Machine Systems Bank Valve - Install - Right Side
24M Motor Grader Machine Systems Bank Valve - Remove - Right side
AP655D Asphalt Paver Machine Systems Conveyor Chain (Drag) - Check and Adjust
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Assemble
AP655D Asphalt Paver Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
120M and 12M Motor Grader Machine Systems Control Manifold (Steering Backup) - Install
770 and 772 Off-Highway Truck/Tractors Control Manifold (Exhaust Diverter, Hydraulic Fan) - Assemble
2008/02/04 The Body Down Indicator is Updated {7258}
450E Backhoe Loader Hydraulic and Steering System Relief Valve
AP655D Asphalt Paver Machine Systems Conveyor Speed (Drag) - Check
2007/12/17 A New Hose Updates the Transmission Oil Lines {3016, 3154}
R1700G Load Haul Dump Additional Messages
AP655D Asphalt Paver Screed Adjustment
R1700G Load Haul Dump Hydraulic System Main Hydraulic System
R1700G Load Haul Dump Hydraulic System Ride Control System
Procedure to Rework Loader Buckets for Use with Fusion Couplers {6001, 6129, 6434} Procedure to Rework Loader Buckets for Use with Fusion Couplers {6001, 6129, 6434}
R1700G Load Haul Dump Braking System Brake Release System
2008/06/09 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 081 - CID 0638 - FMI 06" {1467}
2008/04/07 Correction to Systems Operation Troubleshooting Testing and Adjusting , "System Schematic" {1400, 4800, 7566}