3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Caterpillar

(1) Torque for stud in filter base:

Put 9S3263 Thread Lock Compound on the threads of the stud 10.2 ± 1.5 mm (.40 ± .06 in.) from the end that is installed in the base.

Tighten the stud to ... 80 ± 14 N·m (60 ± 10 lb.ft.)

(2) Put clean engine oil on the filter gasket. Put the filter in position and tighten it until the gasket makes contact with the base. Turn the filter 270° (3/4 of one turn) more.

(3) Tighten the bolt to a torque of ... 24 ± 7 N·m (18 ± 5 lb.ft.)

NOTE: Put clean engine oil on all O-ring seals at assembly.