3406B INDUSTRIAL & MARINE ENGINES Caterpillar

(1) Install two 0.10 mm (.004 in.) shims opposite each other between the rotor body and the end plate.

Tighten retaining nut until there is a slight drag on the shim stock. Tighten the clamping screw in the retaining nut. The clearance between end plate and the rotor can be 0.05 to 0.13 mm (.002 to .005 in.).

(2) Tighten bolt to a torque of 68 N·m (50 lb.ft.).

(3), (4) Tighten bolts to a torque of 75 N·m (55 lb.ft.).

(5), (6) Tighten bolts to a torque of 22 N·m (20 lb.ft.).