C15 and C18 Generator Set Engines Caterpillar


Fuel Cooler - Remove and Install

Usage:

C15 115

拆卸步骤


注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。


------ WARNING! ------

渗漏或溅溢到热表面或电气部件上的燃油会引起失火。 为防止可能的伤害,当更换燃油滤清器或油水分离器滤芯时,要将起动开关断开。 应立即将溅溢的燃油清除干净。


  1. 断开蓄电池。

  1. 将供油开关置于 OFF(接通)位置。



    图 1g01390803

  1. 拆下螺栓 (1) 。 拆下护罩 (2) 。



    图 2g01390806

  1. 拆下软管组件 (3) 。



    图 3g01390808

  1. 拆下螺栓 (4) 。 拆下燃油冷却器 (5) 。

安装步骤




    图 4g01390808

  1. 放置燃油冷却器 (5) 入位,并安装螺栓 (4) 。



    图 5g01390806

  1. 安装软管组件 (3) 。



    图 6g01390803

  1. 安装护罩 (2) 并安装螺栓 (1) 。

  1. 将供油开关置于 OFF(接通)位置。

  1. 连接蓄电池。

Caterpillar Information System:

AP655D and BG655D Asphalt Pavers Propel System Pump Synchronization - Test and Adjust - Steel Track
AP655D and BG655D Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Right Pump (Steel Track)
24M Motor Grader Power Train Magnetic Screen (Transmission)
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track (Rubber) - Remove and Install
24M Motor Grader Hydraulic and Steering System Oil Filter (Implement)
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel Pump (Steel Track)
24M Motor Grader Hydraulic and Steering System Oil Filter (Hydraulic Return)
24M Motor Grader Hydraulic and Steering System Oil Filter (Hydraulic Return)
C4.4 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust
R2900G Load Haul Dump Lifting and Tying Down the Machine
EquipmentManager Dealer Administrator Manual Manage Equipment Groups
EquipmentManager Dealer Administrator Manual Administration
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0679 - FMI 03
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Tilt)
C15 and C18 Generator Set Engines Expansion Tank - Remove and Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0679 - FMI 05
587R Pipelayer Power Train Governor Control Group
587R Pipelayer Machine Systems Fuel Tank - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Left Pump (Steel Track)
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Reversing Fan - Test
R2900G Load Haul Dump Safety Messages
R2900G Load Haul Dump Additional Messages
R2900G Load Haul Dump Engine Starting with Auxiliary Start Receptacle
R1700G Load Haul Dump Lifting and Tying Down the Machine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.