- Multi Terrain Loader:
- 267B (S/N: CYC1-UP)
- 277B (S/N: MDH1-UP)
An improved bogie wheel group is available. The new 261-6296 Bogie Wheel Gp has metal face seals, which provide increased durability in abrasive operating conditions.
The new 261-6296 Bogie Wheel Gp is offered as a service replacement option for the 261-6104 Bogie Wheel Gp. The 261-6104 Bogie Wheel Gp is used with the 199-5371 Bogie Suspension Gp .
Note: The 261-6104 Bogie Wheel Gp replaced the former 199-5427 Bogie Wheel Gp, which was cancelled.
The new 261-6296 Bogie Wheel Gp can also be used with the 204-1446 Track Tensioner Gp (RH) and with the 204-1372 Track Tensioner Gp (LH). In order for the new 261-6296 Bogie Wheel Gp to fit in the tensioner groups, a modification of the mounting plate on the 218-6055 Undercarriage Frame Gp (RH) and on the 218-6056 Undercarriage Frame Gp (LH) must be made. Details for the modification are provided in the information that follows.
Modification of the Mounting Plates
Illustration 1 | g01382470 |
Location of the plate that requires modification |
The plate on the undercarriage frame for mounting the tensioner group is identified in Illustration 1.
Note: The plate is in the same location on the 218-6055 Undercarriage Frame Gp (RH) and on the 218-6056 Undercarriage Frame Gp (LH).
Illustration 2 | g01382592 |
Dimensions for removal of plate material (X) 98.4 mm (3.87 inch) (Y) 38.0 mm (1.50 inch) (Z) 51.6° Angle |
By using a hand grinder or saw, remove the triangular area from the plate that is shaded in Illustration 2. Remove any sharp edges and repaint the plate, as needed.