Piston Motor (Axle Propel) - Install
Installation Procedure
- Use a suitable floor jack to support axle propel motor (1). Install the O-ring seal and axle propel motor (1) on the final drive planetary. The weight of axle propel motor (1) is 20 kg (44 lb). Install four bolts (6) .
Show/hide table
Illustration 1 | g01369188 |
- Connect hose assembly (5) to axle propel motor (1) .
- Connect hose assembly (4) to axle propel motor (1) .
Show/hide table
Illustration 2 | g01369251 |
- Connect hose assemblies (3) and (2) to axle propel motor (1) .
- Fill the axle with oil to the correct level. Refer to Operation and Maintenance Manual for the correct procedure.
- Fill the final drive planetary with oil to the correct level. Refer to Operation and Maintenance Manual for the correct procedure.
- Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual for the correct procedure.
End By: Install the axle guard. Refer to Disassembly and Assembly, "Axle Guard - Remove and Install".
Caterpillar Information System:
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Piston Motor (Axle Propel) - Remove
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Piston Pump (Vibratory) - Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Solenoid Valve (Differential Lock Proportioning)
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Piston Pump (Vibratory) - Remove
C13, C15, and C18 Tier 4 Final Engines Jacket Water Heater
16M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
587T PipelayerEngine Supplement Bottom Guard - Remove
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 039 - CID 1326 - FMI 02
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Steering Frame Lock - Separate and Connect
16M Motor Grader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Solenoid Valve (Differential Lock On, Off)
2007/06/25 New Fuel Tanks Are Available {1273}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Speed Sensor (Wheel) - Auto Differential Lock
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Position Sensor (Articulation Angle)
587T PipelayerEngine Supplement Bottom Guard - Install
REHS2206-00 R2900G Load Haul Dump Cab Mounting Upgrade {7300} REHS2206-00 R2900G Load Haul Dump Cab Mounting Upgrade {7300}
587T PipelayerMachine Systems Pipelayer Frame - Remove
587T PipelayerMachine Systems Pipelayer Frame - Install
12M Motor Grader Display and Camera - Clean - If Equipped with Work Area Vision System
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Differential and Bevel Gear (Locking)
2007/04/16 A New Pressure Relief Setting is Now Used on Paving Compactors {4322}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 2705 - FMI 02
CB14 and CB14 XW Vibratory Compactor Machine Systems Rollover Protective Structure (ROPS) - Foldable
CB14 and CB14 XW Vibratory Compactor Machine Systems Rollover Protective Structure (ROPS)