Piston Pump (Vibratory) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-2082     | Lifting Hook     | 1     |
- Attach a suitable lifting device and Tooling (A) to vibratory pump (4). The weight of vibratory pump (4) is approximately 40 kg (88 lb). Install vibratory pump (4) .
Show/hide table
Illustration 1 | g01373878 |
Show/hide table
Illustration 2 | g01373876 |
- Install bolts (9). Remove Tooling (A) .
- Connect hose assembly (8) .
Show/hide table
Illustration 3 | g01373880 |
- Connect hose assembly (7) .
Show/hide table
Illustration 4 | g01373882 |
- Connect harness assemblies (6) and (5) .
Show/hide table
Illustration 5 | g01373884 |
- Connect hose assemblies (3), (2), and (1) onto vibratory pump (4) .
Show/hide table
Illustration 6 | g01373887 |
End By:
- Lower the operator platform, if equipped. Refer to Disassembly and Assembly, "Operator Platform - Tilt".
- Lower the cab, if equipped. Refer to Disassembly and Assembly, "Cab - Tilt".
Caterpillar Information System:
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Solenoid Valve (Differential Lock Proportioning)
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Piston Pump (Vibratory) - Remove
C13, C15, and C18 Tier 4 Final Engines Jacket Water Heater
16M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
587T PipelayerEngine Supplement Bottom Guard - Remove
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 039 - CID 1326 - FMI 02
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Steering Frame Lock - Separate and Connect
16M Motor Grader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Solenoid Valve (Differential Lock On, Off)
2007/06/25 New Fuel Tanks Are Available {1273}
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Hydraulic Oil Filter - Remove and Install
16M Motor Grader Engine Supplement Alternator - Remove and Install
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Piston Motor (Axle Propel) - Remove
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems Piston Motor (Axle Propel) - Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Speed Sensor (Wheel) - Auto Differential Lock
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Position Sensor (Articulation Angle)
587T PipelayerEngine Supplement Bottom Guard - Install
REHS2206-00 R2900G Load Haul Dump Cab Mounting Upgrade {7300} REHS2206-00 R2900G Load Haul Dump Cab Mounting Upgrade {7300}
587T PipelayerMachine Systems Pipelayer Frame - Remove
587T PipelayerMachine Systems Pipelayer Frame - Install
12M Motor Grader Display and Camera - Clean - If Equipped with Work Area Vision System
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Differential and Bevel Gear (Locking)
2007/04/16 A New Pressure Relief Setting is Now Used on Paving Compactors {4322}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 2705 - FMI 02