Engine Oil Filter Base and Oil Cooler - Remove and Install - Engine in Chassis
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 2P-8250 | Strap Wrench As | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
- Use Tooling (A) in order to remove engine oil filter (4) .
Show/hide table
 | |
| Illustration 1 | g01313916 |
- Disconnect hose assembly (3) .
- Disconnect harness assembly (5) .
- Disconnect clips (6) .
- Remove bolts (2) in order to remove engine oil filter base (1) and the gasket.
- Remove engine oil cooler (7) and the gasket from the machine.
Show/hide table
 | |
| Illustration 2 | g01313919 |
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 2P-8250 | Strap Wrench As | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the gasket and engine oil cooler (7) to the machine.
Show/hide table
| | |
| Illustration 3 | g01313919 |
- Position the gasket and engine oil filter base (1) and install bolts (2) .
Show/hide table
| | |
| Illustration 4 | g01313916 |
- Connect clips (6) .
- Connect harness assembly (5) .
- Connect hose assembly (3) .
- Use Tooling (A) in order to install engine oil filter (4). Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Caterpillar Information System:
770 and 772 Off-Highway Truck Hydraulic and Braking System Cab Mounting
770 and 772 Off-Highway Truck Jacking Locations
2006/10/16 New Hoses and a New Hose Routing are Available in Order to Improve Durability on Backhoe Loaders {5057}
D5R Track-Type Tractor Hydraulic System Accumulator - Uncharged
777E, 777F and 777G Off-Highway Truck Air Cleaner - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Refrigerant Compressor - Remove and Install - Engine in Chassis
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Tube Guard (Rear) - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Tube Guard (Rear) - Remove
773F and 775F Off-Highway Trucks Machine Systems Metering Pump (Steering) - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Trash Guard (Rear) - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Trash Guard (Rear) - Remove
2006/11/06 The Pump On Time has Increased for the Automatic Lubrication System (Hydraulic Type) {7540}
C175-16 Engines for Off-Highway Truck/Tractors Cooling System Operation
770 and 772 Off-Highway Truck Hydraulic and Braking System Gear Motor (Hydraulic Fan)
D6K Track-Type Tractor Engine Supplement Fuel Pressure Regulator - Remove and Install
770 and 772 Off-Highway Truck Power Train Window Wiper and Wiper Motor
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Filter (Secondary)
770 and 772 Off-Highway Truck Hydraulic and Braking System Gear Motor (Hydraulic Fan)
773F and 775F Off-Highway Trucks Machine Systems Piston Pump (Steering) - Remove
773F and 775F Off-Highway Trucks Machine Systems Piston Pump (Steering) - Install
770 and 772 Off-Highway Truck Hydraulic and Braking System Pressure Switch (Brake Accumulator Charge)
D6K Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Unit Injector Hydraulic Pump - Remove - Engine in Chassis
770 and 772 Off-Highway Truck Hydraulic and Braking System Oil Filter (Brake, Hydraulic Fan)