814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Caterpillar


Relief Valve (Transmission Hydraulic Control)

Usage:

814F II BXG


Illustration 1g06064670

Table 1
Specification for 202-8933 Relief Valve Gp (TRANSMISSION HYDRAULIC CONTROL) 
Item  Qty  Part  Specification description 
321-8641 Plug As  Torque to 4.5 ± 1.0 N·m (40.0 ± 9.0 lb in)
164-5567 Quick Disconnect Coupler As  Torque to 14 ± 4 N·m (124 ± 35 lb in)
164-6874 Elbow Fitting  Torque to 34 ± 4 N·m (301 ± 35 lb in)
241-6206 Plug  Torque to 37 ± 7 N·m (27 ± 5 lb ft)
1M-9351 Spring  Length under test force is 133 mm (5.22 inch).
Test force is 197 ± 210 N (145 ± 155 lb).
Free length after test is 109.2 mm (4.30 inch)
4M-2381 Spring  Length under test force is 12.2 mm (0.48 inch).
Test force is 0.70 ± 0.06 N (0.517 ± 0.041 lb).
Free length after test is 22.6 mm (0.89 inch)

Caterpillar Information System:

C11 and C13 Engines and 14M and 16M Motor Graders System Overview
793D Off-Highway Truck Sound Information and Vibration Information
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Suspension Cylinder Pressure Sensor
2007/04/23 New Friction Discs, New Brake Hubs and New Plates Upgrade the Service and Parking Brake Group {4251, 4267}
C11 and C13 Engines and 14M and 16M Motor Graders Electronic Service Tool Does Not Communicate
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) Event Code List
24M Motor Grader Control Manifold (Steering Backup) - Clean/Inspect/Replace
735 Articulated Truck Power Train Final Drive - Assemble
735 Articulated Truck Power Train Final Drive - Disassemble
2007/02/26 New Sun Gear Assembly is Now Available {4131}
Procedure to Install the New Propel Control System on the CB-634D Asphalt Compactors{1408, 3203, 3204, 5070, 5910} Procedure to Install the New Propel Control System on the CB-634D Asphalt Compactors{1408, 3203, 3204, 5070, 5910}
Caterpillar Monitoring System System Schematic
2006/09/04 Version 82 Software is Now Used on Reclaimer Mixers {7000, 7620}
Bench Test Procedure For A 583T Pipelayer And D8T Track-Type Tractor Transmission {3030, 3073} Bench Test Procedure For A 583T Pipelayer And D8T Track-Type Tractor Transmission {3030, 3073}
C11 and C13 Engines and 14M and 16M Motor Graders Component Location
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0621 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0621 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0622 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0622 - FMI 04
2006/09/04 Repairs to the Front Wall of the Truck Body {7258}
14L Motor Grader Transmission and Differential Oil Level - Check
CAES v3.1 Upgrade{7604, 7620} CAES v3.1 Upgrade{7604, 7620}
2012/01/27 Correction to Service Magazine , "Improved Speed Sensors Are Now Available" {1439, 3141, 3175, 4803}
C11 and C13 Engines and 14M and 16M Motor Graders Electrical Connectors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.