V-Belts - Remove and Install - Engines Without an Automatic Belt Tensioner
Show/hide table
图 1 | g01401773 |
典型实例 |
- 如果发动机配有风扇护罩,卸下该风扇护罩。
- 拧松螺母 (1)、螺栓 (2) 和螺栓 (4)。 将交流发电机滑向发动机。
- 卸下 V 形传动带 (3)。
注: 如果还要重复使用 V 形皮带,则标识出传动带的位置和方向。 不要更换单个 V 形传动带。 一定要成对更换 V 形传动带。
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 144-0235 | 传动带张力表 | 1 |
Show/hide table
图 2 | g01401773 |
典型实例 |
- 将 V 型传动带 (3) 安装在正确的皮带轮上。
注: 应将用过的 V 形传动带安装在原始位置和旋向上。
- 移动交流发电机使其远离发动机,以便调整 V 形传动带上的张力。 使用工具 (A) 以达到正确的传动带张力。 更多信息,请参阅规格, "传动带张力表"。 拧紧螺栓 (4) 至扭矩为
22 N·m (16 lb ft) 。 - 拧紧螺栓 (2) 至扭矩为
44 N·m (32 lb ft) 。 - 拧紧螺栓 (1) 至扭矩为
22 N·m (16 lb ft) 。 - 如果发动机配有风扇护罩,安装该风扇护罩。
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Turbocharger - Install
C4.4 Industrial Engine Rocker Shaft and Pushrod - Remove
797B Off-Highway Truck Seat
Procedure to Install New EP Control on the Asphalt Compactors{1408, 3065, 4294, 4801, 5070, 7451} Procedure to Install New EP Control on the Asphalt Compactors{1408, 3065, 4294, 4801, 5070, 7451}
C4.4 Industrial Engine Rocker Shaft and Pushrod - Install
C4.4 Industrial Engine Rocker Shaft - Disassemble
C4.4 Industrial Engine Rocker Shaft - Assemble
C4.4 Industrial Engine Position Sensor (Fuel Injection Pump) - Remove and Install
C4.4 Industrial Engine Pistons and Connecting Rods - Remove
C4.4 Industrial Engine Pistons and Connecting Rods - Install
C4.4 Industrial Engine Pistons and Connecting Rods - Disassemble
C4.4 Industrial Engine Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Vacuum Pump - Remove and Install
C4.4 Industrial Engine Valve Mechanism Cover - Remove and Install
C4.4 Industrial Engine Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Wastegate Solenoid - Remove and Install
C4.4 Industrial Engine Water Pump - Install
C4.4 Industrial Engine Water Pump - Remove
C4.4 Industrial Engine Water Temperature Regulator - Remove and Install
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150} Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0967 - FMI 09
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0590 - FMI 14
2006/07/24 New Chassis Software Is Now Used {7620}
14M and 16M Motor Graders Braking and Hydraulic Fan System Service Brakes