Improved Wiring Harness Routing {1408, 4331}
- Off-Highway Truck/Tractor:
- 797 (S/N: 5YW193-277)
- 797B (S/N: JSM123-219)
Description of Change: The wiring harness for the accumulator pressure sensor has been rerouted in order to provide better protection and improved reliability. This change was done in conjunction with the switch to piston steering accumulators.
Adaptable To: The 220-5601 Chassis Wiring Gp rerouting is effective with the serial numbers listed in Table 1
Show/hide table
| The 220-5601 Chassis Wiring Gp Rerouting is Effective with the Following Serial Numbers | |
| Sales Model | Effective S/N |
| 797B | S/N:JSM220 |
Caterpillar Information System:
C175-16 Engine for 795F Series AC Off-Highway Trucks Fastener Group (Vibration Damper)
Starting and Charging Systems Starter Solenoid Power Circuit (Starter One) Test Description
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Setup Procedure
Starting and Charging Systems Start Relay (Starter One) Test Description
IT38H Integrated Toolcarrier and 938H Wheel Loader Additional Messages
320D2 Forest Machine Hydraulic System Hydraulic System Pressure - Release
Starting and Charging Systems Start Aid Switch/Solenoid Test Description
CB-534D and CB-564D Asphalt Compactors Lifting and Tying Down the Machine
2006/06/12 The Routing of the Cable Assembly for the Starter Is Improved {1408}
587T Pipelayer Machine Systems Fast Fill Fuel Adapter
C175-16 and C175-20 Engines for Off-Highway Trucks Cylinder Block - Type 1
2006/08/07 Change in Torque Specification for "T-Bolt" Clamps That Are Used on Radiator Hoses {1351}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hoist Control Valve
3176C Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Piston Motor (Hydraulic Fan) - Assemble
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering Frame Lock
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering Column Spline (HMU Steering) - Lubricate
IT38H Integrated Toolcarrier and 938H Wheel Loader Window Wiper - Inspect/Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Window Washer Reservoir - Fill
IT38H Integrated Toolcarrier and 938H Wheel Loader Articulation Bearings - Lubricate
IT38H Integrated Toolcarrier and 938H Wheel Loader Equipment Lowering with Engine Stopped