Lift Cylinder
Show/hide table
 | |
| Illustration 1 | g03791354 |
Cylinder | |
(1) Lubricate the threads and tighten the nut to the following torque. ... 4500 ± 450 N·m (3320 ± 330 lb ft)
(2) Outside diameter of a new cylinder rod ... 82.5 ± 0.038 mm (3.248 ± 0.0015 inch)
(3) Inside diameter of the cylinder bore ... 146.1 ± 0.1 mm (5.752 ± 0.004 inch)
(4) Inside diameter of a new cylinder head ... 82.83 ± 0.03 mm (3.261 ± 0.001 inch)
(5) Lubricate the sealing lips with a minimal amount of the lubricant that is being sealed.
(6) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove prior to assembly.
Cylinder stroke ... 800 mm (31.5 inch)
Pin to pin length of a retracted cylinder ... 1388 mm (54.65 inch)
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Water Temperature Regulator - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0171 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
793D Off-Highway Truck Power Train Worksheets
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0171 - FMI 03
AP-1000D and BG-260D Asphalt Pavers Machine Systems Tow Arm
C7 Industrial Engine Reference Material
C7 Industrial Engine Diagnostic Flash Code Retrieval
777F Off-Highway Truck Transmission Tank Oil Level - Check
3516B Off-Highway Trucks System Overview
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Ride Control Accumulator
C7 Industrial Engine Refill Capacities and Recommendations
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Tilt Cylinder - Remove and Install
C7.1 Engines for Caterpillar Built Machines Cooling System - Test
C6.6 Engines for Caterpillar Built Machines Increased Engine Oil Temperature - Inspect
2005/10/03 A New Holder Block is Available for the Reclaimer Mixer {6601, 6819}
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System MID 039 - CID 0190 - FMI 08
C3.4B Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Temperature Sensor (Transfer Gear Oil) - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0246 - FMI 12
541, 551 and 552 Track Feller Bunchers Machine Systems Tilt Cylinder (Rear for Cab Leveling)
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
2005/10/03 Responsibilities for Emission Certified Engines {1000}
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Power Train Introduction