Power Train Oil Pump
Show/hide table
| |
| Illustration 1 | g02725239 |
Show/hide table
| Section(1) | (A) | (B) | (C) |
|---|---|---|---|
| Function | Torque Converter Charge Pump Section | Transmission Charge Pump Section | Torque Converter and Transmission Scavenge Section |
| Output | |
|
|
| RPM | 1800 | 1800 | 900 |
| Pressure | |
|
|
Show/hide table
| (1) | Rotation is counterclockwise in all sections. |
Show/hide table
| Specifications for 270-1762 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 5H-4279 Cup Plug | Apply high strength/ high temperature. Anaerobic flange sealant to the bore of the cup plug. |
| Installation depth is |
|||
| 2 | 4 | 6L-4783 Bolt | Torque to |
| 3 | 1 | 111-4919 Lip Type Seal | Apply high strength/ high temperature. Anaerobic flange sealant to the bore of the lip type seal. |
| Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. | |||
Show/hide table
| |
| Illustration 2 | g02725240 |
|
Section D-D | |
Show/hide table
| Specifications for 270-1762 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| Lubricate the pump with clean oil before operation. The pump must turn freely before installation and after installation. Assemble the pump to the case of the case and frame. | |||
| E | - | - | Clearance between the gears and the cover. Section (A) is the original dimension is |
| F | - | - | Clearance between the gears and the body. Section (B) is the original dimension is |
| G | - | - | Clearance between the gears and the cover. Section (C) is the original dimension is |
| H | - | - | Original diameter of the shafts is |
Show/hide table
| |
| Illustration 3 | g02725384 |
|
View of area J | |
Show/hide table
| Specifications for 270-1762 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| P | - | - | Location of the joints of two bushings from the vertical centerline 30 ± 15 degrees. |
| 4 | 2 | 130-5704 Bushing | Bore of the bushing after installation is |
| Installation depth is |
|||
Show/hide table
| |
| Illustration 4 | g02725409 |
|
View of area K | |
Show/hide table
| Specifications for 270-1762 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| S | 2 | 5M-3605 Dowel | Extension of the dowels from the face of the oil pump body (5) is |
Show/hide table
| |
| Illustration 5 | g02725665 |
|
View of area L | |
Show/hide table
| Specifications for 270-1762 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| U | - | - | Location of the joints of two bushings from the vertical centerline 30 ± 15 degrees. |
| 7 | 2 | 7M-9338 Bushing | Bore of the bushing after installation is |
| Installation depth of (V) is |
|||
| Installation depth of (X) is |
|||
| W | 2 | 8M-8489 Dowel | Extension of the dowels from the face of the oil pump body assembly (6) is |
Show/hide table
| |
| Illustration 6 | g02725670 |
|
View of area M | |
Show/hide table
| Specifications for 270-1762 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| Z | - | - | Location of the joints of two bushings from the vertical centerline 30 ± 15 degrees. |
| 8 | 2 | 7M-9338 Bushing | Bore of the bushing after installation is |
| Installation depth is |
|||
Caterpillar Information System:
793D Off-Highway Truck Air System and Brakes Brake Oil Overheating Troubleshooting
527 Track-Type Skidder Track Adjustment - Adjust
777F Off-Highway Truck Rear Suspension Cylinder Bearings - Lubricate
793D Off-Highway Truck Power Train Transmission Hydraulic Control Pilot Pressure - Test
AP-1000D and BG-260D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Remove
793D Off-Highway Truck Power Train Transmission Hydraulic Control (Pressure Pack) - Test and Adjust
793D Off-Highway Truck Power Train Transmission Hydraulic Control - Test
793D Off-Highway Truck Power Train Solenoid Valve - Test
3516B Off-Highway Trucks Injector Solenoids
Tier II Level Emissions Engine Repower for a 772B, 773B, and 775B Off-Highway Truck {1000} Tier II Level Emissions Engine Repower for a 772B, 773B, and 775B Off-Highway Truck {1000}
R1600G Load Haul Dump Power Train Axle Shaft - Install
R1600G Load Haul Dump Power Train Axle Shaft - Remove
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0590 - FMI 14
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0596 - FMI 14
777F Off-Highway Truck Rear Axle Housing Lateral Control Rod Bearings - Lubricate
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Speed Sensor
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 1400 - FMI 03
2005/10/10 The Load Control Valve Is Improved {5811}
3516B Off-Highway Trucks Prelubrication System
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Hydraulic System Oil Level - Check
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Immobilizer System - If Equipped
793D Off-Highway Truck Power Train Torque Converter Lockup Clutch Signal Pressure - Test
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner