R1600G Load Haul Dump Machine Systems Caterpillar


Seat - Install

Usage:

R1600G 9PP

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     190-5227     Tool Gp     1    



    Illustration 1g01193216

  1. Install Tooling (A) and a suitable lifting device to three points on seat (4). Use the seat belt mounting brackets at the side of the seat and the weight adjusting shaft at the front of the seat as anchor points. The weight of seat (4) is approximately 43 kg (95 lb).

  1. Install seat (4) into the cab.



    Illustration 2g01193210

  1. Install two bolts (3), the nuts and the washers.

  1. Pull lever (1) upwards and move the seat forward.



    Illustration 3g01193209

  1. Install two bolts (2) .

End By: Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".

Caterpillar Information System:

R1600G Load Haul Dump Machine Systems Seat - Remove
R1600G Load Haul Dump Machine Systems Cab - Install
R1600G Load Haul Dump Machine Systems Cab - Remove
R1600G Load Haul Dump Machine Systems Solenoid Valve (Lift Arm Positioner) - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Control Valve (Front Auxiliary Manifold)
966H Wheel Loader and 972H Wheel Loader Steering System Steering System Troubleshooting
24M Motor Grader Hydraulic and Steering System Control Valve (Ripper)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Assemble
RM-300 Reclaimer Mixer Machine Systems Metering Pump (Steering)
14M and 16M Motor Graders Hydraulic and Steering System Control Valve (Blade Tip)
14M and 16M Motor Graders Machine Systems Drawbar
RM-300 Reclaimer Mixer Machine Systems Position Sensor (Rotor Depth, Front Steering, and Rear Steering)
RM-300 Reclaimer Mixer Machine Systems Control Valve (Rear Auxiliary Manifold)
793D Off-Highway Truck Hydraulic System Relief Valve (Front Brake Oil Cooler)
RM-300 Reclaimer Mixer Machine Systems Control Valve (Manual Rotor Lower)
RM-300 Reclaimer Mixer Machine Systems Hydraulic Cylinder
793D Off-Highway Truck Air System and Brakes Pressure Switch (Brake Cooling Hydraulic Filter)
RM-300 Reclaimer Mixer Machine Systems Piston Pump (Auxiliary)
RM-300 Reclaimer Mixer Machine Systems Electrical Schematic (Auxiliary Hydraulic System)
773E Off-Highway Truck Air System and Brakes Pressure Switch (Secondary Brake and Parking Brake)
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Loader Frame to Rear Frame - Connect
773E Off-Highway Truck Air System and Brakes Pressure Switch (Service Brake and Retarder)
RM-300 Reclaimer Mixer Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System)
D6K Track-Type Tractor Engine Valve Lash - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.