R1600G Load Haul Dump Machine Systems Caterpillar


Diverter Valve (Secondary Steering) - Disassemble

Usage:

R1600G 9PP

拆解步骤

开始:

  1. 拆下辅助转向分流器阀。 请参阅拆解和组装, "分流器阀(辅助转向)- 拆卸"。

注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。 污染物或污垢可能会损坏精密部件。 拆解步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。

注: 拆下部件时在辅助转向分流器阀的所有部件上作识别标记。 所有部件必须按原始方向重新安装到原位。




    图 1g01190250

  1. 将安全阀 (2) 从辅助转向阀组件 (1) 上拆下。



    图 2g01190702

  1. 将 O 形密封圈 (3) 和 (4) 从安全阀 (2) 上拆下。



    图 3g01190253

    ------ WARNING! ------

    弹簧加压的零件和/或盖板可能导致人身伤害。

    拆卸盖板时弹簧力将被释放。

    松动螺栓时做好准备把持住弹簧加载的盖板。


  1. 拆下将负载感应端口壳体 (5) 固定到阀组件 (1) 上的四个螺栓 (6) 。



    图 4g01190252

  1. 拆下负载感应端口壳体 (5) 和 O 形密封圈 (7) 。



    图 5g01190255

  1. 拆下弹簧 (8) 和滑阀 (9) 。



    图 6g01190256

  1. 拆下减压阀 (10) 。



    图 7g01190257

  1. 将 O 形密封圈 (13) 、支承环 (14) 、O 形密封圈 (11) 、支承环 (15) 和 O 形密封圈 (12) 从减压阀 (10) 上拆下。



    图 8g01190703

    ------ WARNING! ------

    弹簧加压的零件和/或盖板可能导致人身伤害。

    拆卸盖板时弹簧力将被释放。

    松动螺栓时做好准备把持住弹簧加载的盖板。


  1. 拆下 2 个螺塞 (16) 。



    图 9g01190704

  1. 拆下两个单向阀 (17) 和两个弹簧 (18) 。

  1. 将 O 形密封圈 (19) 从两个螺塞 (16) 上拆下。



    图 10g01190705

  1. 拆下螺塞 (20) 、 (21) 、 (22) 和 (23) 。 将 O 形密封圈从螺塞 (20) 、 (21) 、 (22) 和 (23) 上拆下。

Caterpillar Information System:

R1600G Load Haul Dump Machine Systems Bucket Control Safety Pins - Remove and Install
R1600G Load Haul Dump Machine Systems Steering Frame Lock - Remove and Install
R1600G Load Haul Dump Machine Systems Tilt Lever and Tilt Link - Remove
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324} Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0596 - FMI 09
14M and 16M Motor Graders Hydraulic and Steering System Control Valve (Articulation)
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Piston Pump Flow (Auxiliary) - Test and Adjust
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0596 - FMI 02
793D Off-Highway Truck Engine Supplement Air Cleaner - Disassemble
793D Off-Highway Truck Engine Supplement Air Cleaner - Assemble
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Auxiliary System Troubleshooting
2005/08/22 Service Repair Parts Are Available for the Air Cleaner (Oil Bath) {1051}
Testing and Reworking the Flow Control Valve{5051} Testing and Reworking the Flow Control Valve{5051}
793D Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
RM-300 Reclaimer Mixer Power Train Final Drive Planetary
RM-300 Reclaimer Mixer Power Train General Information - Propel System
RM-300 Reclaimer Mixer Power Train Hydraulic Schematic
RM-300 Reclaimer Mixer Power Train Location of Electrical Components
RM-300 Reclaimer Mixer Power Train Location of Hydraulic Components
RM-300 Reclaimer Mixer Power Train Operator Controls
RM-300 Reclaimer Mixer Power Train Parking Brake Control Valve
RM-300 Reclaimer Mixer Power Train Piston Motor (Front Propel)
RM-300 Reclaimer Mixer Power Train Piston Motor (Rear Propel)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.